power_monitor Messages

This chapter describes messages generated by the power_monitor subsystem.

Critical

Message: Bay <area>, controller <number> - Initialization failure: <message>

Meaning: Failed to spawn Power Monitor task.

Action: Save your system log to a file and contact Avici Customer Support.

Message: No bay monitor cards can be found in bay <area>

Meaning: The Bay monitoring hardware component has failed or is not installed.

Action: Save your system log to a file and contact Avici Customer

Major

Message: Bay <number>, bay monitor <number> - <message>

Meaning: Error in Bay monitor readings

Action: Save your system log to a file and contact Avici Customer Support.

Message: Bay <n>, breaker <n> is off

Meaning: Breaker rail voltage is off

Action: Save your system log to a file and contact Avici Customer Support.

Message: Bay <n>, breaker <n> is tripped

Meaning: Breaker rail voltage is tripped

Action: Save your system log to a file and contact Avici Customer Support.

Message: Bay <number>, voltage on rail <id> (<voltage> V) is too high

Meaning: Voltage on rail is high

Action: Save your system log to a file and contact Avici Customer Support.

Message: Bay <number>, voltage on rail <id> (<voltage> V) is too low

Meaning: Voltage on rail is low

Action: Save your system log to a file and contact Avici Customer Support

Minor

Message: Bay <number>, voltage on rail <id> (<voltage> V) is normal again

Meaning: The voltage measured on the specified rail is now within a normal range.

Action: No action required

Copyright © 2006 Avici Systems Inc.
Avici® and TSR® is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are trademarks of Avici Systems Inc.

   Source File Name: power_monitor.fm
    HTML File Name: power_monitor.html
    Last Updated: 09/26/06 at 14:21:45

Please email suggestions and comments to: doc@avici.com