This procedure defines the contents of the Stackable Switch Router Cable kit and directs the user to the document that details the installation of the enclosed cables. Before beginning, carefully inspect the package to ensure no damage occurred to the cables during shipping or delivery. If you suspect any possible damage, contact Customer Service immediately.
Support Services
There are three ways to obtain information on customer service and training:
- Phone:
United States Support: 877-292-8424 (TSR-BY-AVICI)
International Support: 01-978-964-2350
- E-mail: support@avici.com
- World Wide Web: http://www.avici.com
Defining Cable Kit Contents
Enclosed in the cable kit are six RJ-45 Ethernet cables: two 4-ft. cables, two 2-ft. cables, and two 2.5-ft. cables.
The two 4-ft. cables connect the server ETH 1 and ETH 2 RJ-45 connectors to the RJ-45 connector located in the AUX tray of the primary and secondary Server-Attached modules (SAM).
The two 2-ft. cables connect the server ETH 3 and ETH 4 RJ-45 connectors to the appropriate server connector panel RJ-45 connectors.
Refer to the SSRTM Server Module Field Replacement Procedure (Part No. 02131-03) for server related cable installation details.
One thinnet Ethernet cable connects SSR backplanes in multi-chassis installations. Installation information for this cable
can be found in the Stackable Switch Router Install Guide
(Part No. 04113-00).The two 2.5-ft. cables connect from the backside of the server connector ports to the Bay Controller backplane. Installation information for this cable can be found in the Stackable Switch Router Install Guide (Part No. 04113-00).
Copyright © 2002
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, and NSR® are trademarks
of Avici Systems Inc.
Source
File Name: 04256-01_revBA.fm
HTML File Name: 04256-01_revBA.html
Last Updated: 11/25/02 at 11:22:37