This procedure defines the contents of the Terabit Switch Router Series II (TSR II) Cable Kit and directs the user to the document that details the installation of the enclosed cables. Before beginning, carefully inspect the package to ensure no damage occurred to the cables during shipping or delivery.
If you suspect any possible damage, contact Customer Service immediately.
Cable Kit Contents
This cable kit includes the following RJ-45 Ethernet cables:
- Two six-foot cables, which are used to connect the server ETH 1 and ETH 2 RJ-45 connectors to the RJ-45 connector located in the AUX tray of the primary and secondary Server-Attached Modules (SAM).
- Two eight-foot cables, which are used to connect the server ETH 3 and ETH 4 RJ-45 connectors to the RJ-45 connector located in the AUX tray of the primary and secondary SAM.
- Two fifteen-foot cables, which can be used in place of either the six-foot or eight-foot cables, if necessary.
Refer to the TSR® II Server Module Field Replacement Procedure (Part No. 02131-02) for cable installation details.
Support Services
There are three ways to obtain information on customer service and training:
- Phone:
United States Support: 877-292-8424 (TSR-BY-AVICI)
International Support: 01-978-964-2350
- E-mail: support@avici.com
- World Wide Web: http://www.avici.com
Copyright © 2002
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, and NSR® are trademarks
of Avici Systems Inc.
Source
File Name: 04256-00_revBB.fm
HTML File Name: 04256-00_revBB.html
Last Updated: 11/25/02 at 11:33:11