This procedure defines the contents of the Terabit Switch Router Series II (TSR II) Cable kit and directs the user to the document that details the installation of the enclosed cables. Before beginning, carefully inspect the package to ensure no damage occurred to the cables during shipping or delivery. If you suspect any possible damage, contact Customer Service immediately.
Support Services
There are three ways to obtain information on customer service and training:
- Phone:
United States Support: 877-292-8424 (TSR-BY-AVICI)
International Support: 01-978-964-2350
- E-mail: support@avici.com
- World Wide Web: http://www.avici.com
Defining Cable Kit Contents
Enclosed in the cable kit are four RJ-45 Ethernet cables: two six foot cables and two eight foot cables. The two six foot cables connect the server ETH 1 and ETH 2 RJ-45 connectors to the RJ-45 connector located in the AUX tray of the primary and secondary Server-
Attached modules (SAM). The two eight foot cables connect the server ETH 3 and ETH 4 RJ-45 connectors to the appropriate server connector panel RJ-45 connectors.Refer to the TSR® II Server Module Field Replacement Procedure (P/N 02131-02) for cable installation details.
Copyright © 2001
Avici Systems Inc.
Avici® and TSR® are registered
trademarks of Avici Systems Inc.
IPriori™ is a trademark of Avici Systems Inc.
Source File Name: 04256-00_revAA.fm
HTML File Name: 04256-00_revAA.html
Last Updated: 10/24/01 at 13:33:41
Please email suggestions and comments to: doc@avici.com