| |
|
|
The Terabit Switch Router Series II Install Guide (Multi-bay) describes the procedures for installing the Terabit Switch Router (TSR®) Series II system hardware for Multi-Bay installations only. For information related to installing single TSR II bays, refer to the TSR Series II Installation Guide (Single Bay).
For information related to installing single TSR bays, refer to the TSR Install Guide (Single Bay). For information related to installing multiple TSR bays, refer to the TSR Install Guide (Multi-Bay).
About This Document
This document contains descriptions of:
- Positioning multiple bay configurations
- Connecting multiple bays
- Populating multiple bays
IIntended Audience
The audience for this document is qualified service personnel trained in on-site network equipment installations.
What You Need to Know
Familiarity with data communications and electronic concepts and terms is necessary to understand the information presented in this guide.
One to two years of experience installing data communications equipment is necessary to perform the installation procedures in this guide.You must be familiar with general cabinet, shelf, and circuit board installation techniques and terminology. In addition, you must be aware of all electrical and physical safety procedures and standards.
Related Information
Administrators should be familiar with Central Office (CO) equipment operation and theory before installing the TSR system. The following documents are recommended as further reading:
- NEBS Requirements: Physical Protection GR-63-CORE and GR-1089 CORE
- International Telecommunications Union Standards ITU-TS
- IPriori Software Configuration Guides
Document Organization
The type of the configuration being installed determines the sequence of chapters that guide the installation. Refer to the table below for each specific installation.
Configuration Type Read Chapters (in specified order) 2-Bay Configuration
- TSR II (Cold)
1, 2, and 3
- TSR II (Live)
1, 2, and 4
- TSR/TSR II (Cold)
1, 2, and 6
- TSR/TSR II (Live)
1, 2, and 7
4-Bay Configuration*
- TSR II (4 bays)
1, 2, and 5
- TSR/TSR II to TSR II/TSR II
1, 2, and 8
* It is assumed all 4-Bay Configurations are expanded from live 2-Bay Configurations. Notational Conventions
The following are samples of the caution and warning conventions used in this document:
WARNING (W:0-0) This symbol indicates a risk of personal injury.
The number in parentheses is a reference number for translations.
CAUTION (C:0-0) This symbol indicates a risk of service interruption or equipment damage.
The number in parentheses is a reference number for translations.Support Services
There are three ways to obtain information on customer service and training:
- Phone: TSR-BY-AVICI 877-292-8424 (TSR-BY-AVICI)
International Support: 01-978-964-2350
- E-mail: support@avici.com
| |
|
|
Copyright © 2003
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: preface.fm
HTML File Name: preface.html
Last Updated: 03/28/03 at 11:06:36
