Overview

Compliance to Electrical and Safety Standards

Compliance to Environmental Regulations and Directives

Antistatic Precautions

TSR II Bay Dimensions, Weights and Floor Loading

TSR II Full Bay Configuration

TSR II Split Bay Configuration

TRS II Bay Components

Preinstallation

Inspecting the Shipping Contents

Unpacking the TSR II System

Unpacking the Removable Breaker Interface Panel (BIP)

Moving the Bay

Using a Pallet Truck

Using Custom Dolly

Removing the Subassemblies

Removing the Front Air Plenum Assembly and Cooling Modules

Removing the Bay Controller Backplane Cover

Using Custom Dolly to Remove Bay from Shipping Pallet

Removing Vertical Doors

Installing the Front Dolly

Installing the Rear Dolly

Removing the Shipping Pallet

Placing and Anchoring Bays

Raised Floor Load Capacity

Pedestal Sizes

Locating the Anchor Holes

Anchoring the Bay on a Concrete Floor

Measuring and Cutting Raised Floor Tiles

Drilling Holes in the Concrete Subflooring

Anchoring the Pedestal

Anchoring the Bay to the Pedestal

Locating the Anchor Holes

Installing Anchors and Threaded Rod

Anchoring the Bay to a Raised Floor

Installing TSR II Bay Components

Installing Power and Return Feeds to the BIP

Reinstalling the Subassemblies

Reinstalling the Vertical Doors

Reinstalling Lower Cable Guide Assemblies

Installing the Bay Controllers

Reinstalling the Cooling Modules

Reinstalling the Front Air Plenum Assembly and Grille

Reinstalling the Bay Controller Protective Cover

Preparing to Install Router and Route Controller Modules

Installing the Antistatic Wrist Strap

TSR II Bay Shelf and Slot Numbering

Router Module Population Rules - Single Bay

Populating the TSR II Split Bay

Removing Filler Modules

Installing System Cables

Installing Module Cables

Installing Route Controller Module Cables

TSR II:RS-232 Serial Interface Connector

Installing Bay Controller Backplane Cables

Ethernet Cables

CO Alarm Levels

CO Alarm LEDs and Audible Bells

Installing Central Office Alarm Cables

Configuring Central Office Alarm Cable Connections

Reinstalling EMI Covers

Route Controller Module LEDs

Restarting a Route Controller Module

Router Module LEDs

Restarting a Routing Module

Bay Controller LEDs

Restarting a Bay Controller Module

Installing the Bay Controller

Cooling Modules

Filler Modules

Index

Copyright © 2006 Avici Systems Inc.
Avici® and TSR® is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR™ are trademarks of Avici Systems Inc.

   Source File Name: 03801-00_revIATOC.fm
    HTML File Name: toc.html
    Last Updated: 12/08/06 at 10:47:54

Please email suggestions and comments to: doc@avici.com