| |
|
|
The Terabit Switch Router Series II Install Guide (Single Bay) describes the procedures for installing and verifying operation of the Terabit Switch Router Series II (TSR® II) system hardware.
About This Document
This document contains descriptions of:
- TSR II system hardware
- Replaceable units
- Anchoring and installation procedures
The hardware descriptions familiarize you with the system hardware components and their physical location in the TSR II bay.
The installation procedures assist you in installing the TSR II bay hardware, including:
- Making the required power, safety ground, and interface connections
- Populating the bay
Intended Audience
The audience for this document is qualified service personnel trained in on-site network equipment installations.
Related Information
Administrators should be familiar with Central Office (CO) equipment operation and theory before installing the TSR II system. The following documents are recommended as further reading:
- Terabit Switch Router Series II Install Guide (Multi-bay) (Part No. 04114-00)
- NEBS Requirements: Physical Protection GR-63-CORE and GR-1089 CORE
- International Telecommunications Union Standards ITU-TS
What You Need to Know
Familiarity with data communications and electronic concepts and terms is necessary to understand the information presented in this guide.
One to two years of experience installing data communications equipment is necessary to perform the installation procedures in this guide.You must be familiar with general cabinet, shelf, and circuit board installation techniques and terminology. In addition, you must be aware of all electrical and physical safety procedures and standards.
Notational Conventions
This guide uses the following caution and warning conventions:
WARNING (W:0-0) This symbol indicates a risk of personal injury.
The number in parentheses is a reference number for translations.
CAUTION (C:0-0) This symbol indicates a risk of service interruption or equipment damage.
The number in parentheses is a reference number for translations.Support Services
Avici offers three ways to obtain information on customer service and training:
- Phone:
United States Support: 877-292-8424 (TSR-BY-AVICI)
International Support: 01-978-964-2350
- E-mail: support@avici.com
| |
|
|
Copyright © 2006
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR™ are
trademarks of Avici Systems Inc.
Source
File Name: preface.fm
HTML File Name: preface.html
Last Updated: 12/08/06 at 10:47:58
