| |
|
|
General Commands
alias mode shortform full-command
no alias mode shortform
disable
do exec-cmd
enable [level]
.end
[terminal] exec-timeout min [sec]
exit
help
?
partial_command ?
command_name ?
[terminal | no] history
[terminal | no] history size num-lines
[terminal] ip netmask-format [decimal | hexadecimal | bit-count]
[terminal | no] length num_lines
line {vty value | console value}
line vty session-limit value
[no] login
logout
password [0 | 7] password
privilege level level
quit
rlogin {ip_addr | word}
run exec-cmd
show alias
show history
show line
show terminal
telnet {hostname | ip-address}
[no | terminal] width num-chars
Configuration and File Management
boot [1 | 2]
boot {filename | package-file}
boot {filename | package-file} [1 | 2]
boot flags value
boot config filename
boot {filename | package-file}[1 | 2] [config filename]
cd [device:] [directory]
configure {terminal | file | network}
copy source destination
copy {tftp | ftp} destination
copy source {tftp | ftp}
copy ftp filename internal
copy source scp
delete {startup-config | [ device: ] file}
dir [device:][directory][all]
erase {startup-config | [device:] file}
failover
more filename
post-burn image-name
pwd
reboot [1 | 2]
reboot filename
reboot filename [1 | 2]
reboot flags value
reboot config filename
reboot filename [1 | 2] [config filename]
reload [notbay] [in hh:mm [msg]] [at hh:mm [msg]] [cancel] [cold]
rom-burn image-name
show boot
show flash [module module-id | bay bay-id]
show reload
show running-config [sub-system]
show running-config interface {pos | atm | gbe} bay/slot/port
show running-config interface {atm | vlan} bay/slot/port.subinterface
show running-config interface {aggregate-link | composite-link} name
show running-config interface vlan name.subinterface
show startup-config
show users [all]
squeeze [volume:]
tail filename
tail filename n
undelete [volume:] file
unerase [volume:] file
upgrade all package-file
upgrade [bay &| module &| server] {package-file}
write {file filename | network | terminal} [interface | system | ospf | isis | bgp | ip-route | policy]
System Administration
arp retry count retryNum
no arp retry count
arp retry timeout retryWait
no arp retry timeout
arp timeout timeoutPeriod
no arp timeout
[no] auto-upgrade
[no] banner [? | lines | text]
bay baynum/controllernum
bay-all
checkpoint [filename]
clear counters [interface-counters | extension-counters | inflow-counters | fabric-counters | ip-traffic-counters | access-list | all] [interface [pos bay/slot/port | gbe bay/slot/port |composite-link name | all]]
clear counters [interface-counters | extension-counters | inflow-counters |fabric-counters | ip-traffic-counters | access-list | all] [module [bay/slot | all]]
clear counters ttl-expiry-counters [module bay/slot]
clear reliability counters
clock set hh:mm[:ss][day month|month day] year
clock timezone string [number]
no clock timezone
crashdump {server serverID | module bay/slot | bay bay/slot} [address address] [context context] [directory directory] [event event] [filename filename] [gateway gateway] [host host] [password password] [retry retry] [sequence sequence] [user user]
crashdump force{server serverID | module bay/slot | bay bay/slot}
debug show tech-support [filename]
default failover window
enable password [mode] password
no enable password
failover
failover window [duration durationVal] [threshold thresholdVal]
fpga activebank [1|2]
fpga activebank [linecard | switchcard] [1|2]
fpga download [image | package-file] [linecard | switchcard [1|2] [1xoc192c_a | 1xoc192c_b | 2xoc48c | 2x1gbe | 8x1gbe]]
hostname hostname
mode {hot | warm | cold}
[no] module bay#/slot# [type]
module all
[no] package-file filename.pkg
ping [ip-addr|hostname] [internal] [num_packets] [packet_size] [timeout] [extended]
rlogin {ip_addr | word} [internal]
primary-preference prefValue
redundancy
reliability period duration
no reliability
[no] sam-timeout-multiplier multiplier
[no] sam-aes-threshold threshold
send [ console | vty number | * | file filename]
server server-id
server-id server-id {upper|lower|full}
server-location bay/slot
server server-id {CPU | memory} threshold [falling | rising | interval}
show banner
show bay baynum [# fans] [server-registrations] [controllers] [all]
show bay baynum slots [temperature] [owner] [brief] [slotnum {detailed | mib}]
show calendar
show clock [detail]
show cpu {idle|tasks} {server server-id | bay [1|2] | module bay/slot} [5sec | 1min | 5min | taskname]
show crashdump {server serverID | module bay/slot | bay bay/slot}
show fpga module {bay/slot | all}
show memory {server server-id | bay [1|2] | module bay/slot} [verbose | group [group-name] | bucket-size [bucket-size]]
show modules [bay/slot] [brief]
show modules ttl-expiry-counters bay/slot
show package-file name
show population {f1 number | f2 number}...
show population {[t] {f1 number | f2 number}...}...
show redundancy [verbose]
show server verbose
show sntp
show users [all]
show usernames
show version
[no] sntp server ip_address
system-password { 0 | 7 } password
upgrade all package-file
upgrade {bay | module | server} package-file
username name password [0 | 7] password
[no] warm-standby
Interface
arp {arpa | snap}
[no] arp ipaddress mac-address
clear arp-cache {all | interface bay/slot/port | module bay/slot | entry ipAddress | vlan bay/slot/port.vlan_id}
clear counters [pos bay/slot/port | gbe bay/slot/port | composite-link name | vlan bay/slot/port.vlan_id]
[no] close-threshold value
crc fcs-value
no crc
default crc
default keepalive
default mtu
description description_string
no description
encapsulation type
no encapsulation
flowcontrol {asymmetric | symmetric}
[no] interface aggregate-link identifier
[no] interface composite-link identifier
[no] interface gbe bay/slot/port
[no] interface ethernet 0
[no] interface loopback identifier
[no] interface pos bay/slot/port
[no] interface vlan bay/slot/port.vlanid
[no]interface vlan aggLinkName.vlanid
[no] ip access-group access-list-name {control-in | control-out | in | out | mpls-in}
[no] ip accounting mac-address {input | output}
[no] ip address ip-addr mask
[no] ipcp-negotiation
keepalive timer-value
no keepalive
lacp
no lacp
mac address mac-address
[no] mac address
marker
no marker
[no] member-link gbe bay/slot/port
[no] member-link pos bay/slot/port
mirror {gbe bay/slot/port macAddress | pos bay/slot/port | netflow}
monitor {interface pos bay/slot/port | composite-link link-name | vlan bay/slot/port.vlanid}
mtu mtu-size
no mtu
mtu-negotiate
no mtu-negotiate
[no] negotiation auto
open-threshold value
no open threshold
peer default ip address remote-ip-address
no peer default ip address
ppp negotiation-timeout seconds
no ppp negotiation-timeout
remote-fault-indication
no remote-fault-indication
show interface aggregate-link identifier
show interface aggregate-link access-list identifier
show interface aggregate-link [extension-counters | inflow-counters]
show interface aggregate-link mirror
show interface aggregate-link {lacp-details | lacp-counters | lacp-debug} identifier
show interface composite-link identifier
show interface composite-link access-list identifier
show interface composite-link identifier members
show interface composite-link identifier statistic {average | delta} sampleperiod
show interface composite-link [extension-counters | inflow-counters]
show interface ethernet 0
show interface ethernet internal ethInterface
show interface gbe [access-list] [extension-counters | inflow-counters | bay/slot/port] [bay/slot/port {statistics average period | statistics delta period ]
show interface loopback number
show interfaces [gbe bay/slot/port] mac-accounting
show interface [access-list] pos bay/slot/port [extension-counters | inflow-counters | packet-qos-counters]
show interface pos bay/slot/port statistics {average | delta} sampleperiod
show interface {pos bay/slot/port | composite-link name} statistics {average | delta} sampleperiod
show interface vlan {bay/slot/port.vlan_id | AggName.vlan_id | all}
show ip arp {aggregate-link AggName | gbe bay/slot/port | hostname hostName | ipAddress | macAddress}
show ip arp vlan {bay/slot/port.vlan_id | AggName.vlan_id}
show output-interface {pos | gbe} bay/slot/port source-ip srcIPadd dest-ip destIPadd [in-label label]
show smon control
show smon stats statsID [owner ownerName]
[no] shutdown
smon stats vlanID owner ownerName
[no] vlan [bay/slot/port]
ATM
clock source [internal | line]
[no] clock source
atm ilmi-keepalive poll-int chkConInt numRet
[no] atm ilmi-keepalive
atm maxvc [max-num-vcs]
[no] atm maxvc [max-num-vcs]
atm uni-version [value]
[no] atm uni-version
default {maxvc | uni-version}
description text
[no] description
ilmi-enable
[no] ilmi-enable
ilmi manage
[no] ilmi manage
ip address ip-addr-netmask
[no] ip address
mtu mtu-size
oam-pvc manage [loopback frequency]
[no] oam-pvc manage
oam retry [retry up count | retry down count | retry poll frequency]
[no] oam retry
protocol ip ip-address
[no] protocol ip
pvc name-tag vpi/vci
[no] pvc name-tag vpi/vci
show atm pvc [name tag | vpi/vci]
show interface atm bay/slot/port .number[extension-counters | inflow-counters | access-list]
SONET/SDH
clear sonet performance current pos bay/slot/port
clock source {line | internal}
no clock source
[no] loopback {internal | line}
show sonet performance [current | previous n] [ pos bay/slot/port]
show sonet status pos bay/slot/port [detailed]
show sonet thresholds pos bay/slot/port
[no] shutdown
sonet failure-delay delayVal {s|ms}
no sonet failure-delay
[no] sonet flag {c2 byte-val | j0 {SONval | SDHval}}
[no] sonet framing {sonet | sdh}
sonet path-trace message
no sonet path-trace
[no] sonet scramble-atm
[no | default] sonet threshold sonet-type event-type integer
[no] sonet threshold line [cv cv-val | es es-val | ses ses-val | uas uas-val]
[no] sonet threshold line-far-end [cv cv-val | es es-val | ses ses-val | uas uas-val]
[no] sonet threshold path [cv cv-val | es es-val | ses ses-val | uas uas-val]
[no] sonet threshold path-far-end [cv cv-val | es es-val | ses ses-val | uas uas-val]
[no] sonet threshold section [cv cv-val | es es-val | ses ses-val | uas uas-val]
SONET APS
aps authenticate string
no aps authenticate
[no] aps force {circuit# | working | protect}
[no] aps group name
[no] aps lockout
[no] aps manual {circuit# | working | protect}
aps protect [circuit# | circuit# ipaddress]
no aps protect [circuit# | circuit# ipaddress]
aps timers helloVal [holdVal]
no aps timers
aps working [circuit#]
no aps working [circuit#]
show aps {brief | detail | group groupName| interface interfaceID}
AAA and SSH
[no] aaa
[no] aaa {radius | tacacs} accounting
[no] aaa authentication enable default protocol enable
[no] aaa {radius | tacacs} host hostname
[no] aaa {radius | tacacs} [host hostname] key secret
[no] aaa last-resort
[no] aaa optional-passwords
aaa password-prompt promptString
[no] aaa policy [first-available | priority | round-robin]
[no] aaa {radius | tacacs} [host hostname] port port-number
[no] aaa {radius | tacacs} [host hostname] priority [primary | secondary]
[no] aaa protocol {radius | tacacs}
[no] aaa {tacacs | radius} host hostname retransmit attempts
aaa source-interface {ethernet | loopback} 0
[no] aaa tacacs directed-request
[no] aaa timeout time
aaa username-prompt promptString
disconnect ssh session-number
disconnect telnet session-number
[no] ip ftp
[no] ip ssh
[no] ip ssh permit [unverified_host_keys]
ip ssh version number
no ip ssh version
[no] ip telnet
line vty session-limit value
show aaa
show ip ssh
NTP
ntp master [stratum]
[no] ntp peer [IP_address] [prefer]
[no] ntp server ip_address [prefer]
ntp access-group {peer | serve} aclName
[no] ntp access-group {peer | serve} aclName
ntp update-calendar
ntp source type number
[no] ntp source type number
show ntp associations
show ntp counters
show ntp status
SNMP
debug snmp headers [all | dump-packets | trace | trap | varbinds]
no debug snmp
[no] debug snmp dump-packets
show snmp {statistics | system | traps | hosts | trap-source | counters}
show snmp hosts
snmp-server community community-string {rw | ro} [access-list-name]
no snmp-server community community-string
[no] snmp-server contact contact
[no] snmp-server enable traps type
[no] snmp-server group groupname {snmpv1 | snmpv2 | snmpv3
{auth | noauth | priv} }[read readview] [write writeview]
[notify notifyview] [access access-list-name]
snmp-server host {ip_address | hostname} [trap]{snmpv1 | snmpv2 | snmpv3 ] [auth | priv} {community name | auth-password } [trap-category1 ... trap-category14]
no snmp-server host [ip_address | hostname]
no snmp-server host {ip_address | hostname} trap {snmpv1 | snmpv2 | snmpv3 {auth | no auth | priv}}
[no] snmp-server location location
[no] snmp-server trap source [ethernet 0...4 |...4 | composite-link name composite-link name | loopback 0 | pos bay/slot/port | pos bay/slot/port ]
[no] snmp-server engineID engineID-string
[no] snmp-server view view-name oid-tree [included | excluded]
snmp-server user username groupname {snmpv1 | snmpv2 | snmpv3 [encrypted] [auth {md5 | sja} auth-password [priv des56 priv-password]]} [access access-list-name]
[no] snmp-server user
