| |
|
|
A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z
A
- aligning bays
- adjusting alignment of 2-bay configurations 1
- adjusting alignment of 4-bay configuration 1
- TSR 2-bay configurations 1
- TSR/TSR II 4-bay configuration 1
- anchoring
- multi-bays 1
- antistatic
- precautions 1, 2
- wrist strap 1, 2, 3, 4, 5, 6
- axes
- backplane numbering (x) 1, 2
- backplane numbering (y) 1, 2
- bringing up axes (x) 1, 2
- bringing up axes (y) 1, 2
- designation (cold) 1, 2
- designation (live) 1, 2
- designation (y) 1, 2
- temporary shut down of axes (x) 1, 2
- temporary shut down of axes (y) 1, 2
B
- backplane connection locations
- (y axis) 1, 2
- module/OTT 1
- bay identifier switches 1, 2
- bay numbering 1, 2, 3, 4, 5
- 2-bay configuration 1, 2, 3
- 4-bay configuration 1, 2
C
- cable racks 1, 2, 3
- cable racks (TSR/TSR II) 1, 2, 3
- configuration build out
- 4-bay 1
- connecting backplanes
- 2-bay configuration (cold) 1
- TSR 2-bay configuration 1, 2, 3, 4
- TSR/TSR II 2-bay configuration 1, 2
- TSR/TSR II 4-bay configuration 1, 2, 3, 4
- connecting bays 1, 2
- TSR 2-bay configuration 1
- TSR/TSR II 2-bay configuration 1
- TSR/TSR II 4-bay configurations 1, 2
- connection bolts 1, 2, 3
- tightening 1, 2, 3, 4
D
- determining backplane connection locations 1
- (TSR II 4-bay) 1
- TSR/TSR II 2-bay 1
- TSR/TSR II 4-bay 1
E
- earthquake standards 1
- electrostatic discharge jack 1, 2, 3, 4, 5, 6
- EMI enclosures
- installing 1
- removing 1, 2, 3, 4
- removing (TSR II) 1
- EMI gasket installation 1, 2
- ESD, See electrical and safety standards 1
F
- fault tolerance 1
I
- Installation Overview 1
- installing
- cable racks 1
- cable racks (TSR/TSR II) 1
- EMI enclosures 1, 2
- OTT connector cables 1, 2, 3, 4
- switchable flex connectors 1, 2
- thinnet Ethernet connection 1, 2, 3, 4
- thinnet Ethernet connection (TSR/TSR II bays) 1
- thinnet Ethernet connection (TSR II 4-bay) 1
L
- live upgrades 1
- loopback connector 1
- removing 1, 2, 3, 4, 5, 6
M
- multi-bay anchoring 1
- Multi-Bay Configuration 1
O
- OTT connector cables 1, 2, 3, 4, 5, 6
P
- performing live upgrades 1
- population rules
- bay 3 1, 2, 3
- bay 3 (live) 1
- bays 2 and 4 1, 2
- positioning
- 2-bay configurations 1, 2
- 4-bay configurations 1, 2
- procedures 1
- bringing up y axes 1, 2
- connecting backplanes in 2-bay configuations (cold) 1, 2
- connecting backplanes in 2-bay configurations (live upgrade) 1
- connecting backplanes in 4-bay configurations 1
- connecting backplanes in TSR/TSR II 2-bay configurations 1
- connecting backplanes TSR II 4-bay configurations 1
- connecting bays 1 and 3 to bays 2 and 4 1
- installing cable racks 1
- installing cable racks (TSR/TSR II) 1
- installing OTT connector cables bay 1 to bay 2 1, 2
- installing OTT connector cables bay 3 to bay 4 1, 2
- installing switchable flex connectors 1, 2, 3, 4, 5, 6, 7
- installing thinnet Ethernet (TSR 2-bay) 1
- installing thinnet Ethernet (TSR/TSR II 2-bay) 1, 2
- installing thinnet Ethernet (TSR/TSR II 4-bay) 1, 2
- installing thinnet Ethernet (TSRI 2-bay) 1
- performing live upgrades 1
- removing EMI enclosures 1, 2, 3, 4
- removing EMI enclosures (TSR/TSR II) 1
- removing EMI enclosures (TSR II) 1
- removing loopback connectors 1, 2, 3, 4, 5, 6, 7, 8
- securing EMI enclosures 1, 2, 3
- securing EMI enclosures (TSR II) 1
- securing EMI enclosures TSR /TSR II) 1
- setting the switchable flex connector 1, 2, 3, 4, 5
- shutting down y axes 1, 2
R
- removing
- EMI enclosures 1, 2, 3
- EMI enclosures (4-bay) 1
- EMI enclosures (TSR II) 1
- loopback connectors 1, 2, 3, 4, 5, 6, 7
- removing loopback connectors 1
- removing side panels 1, 2
- rotary and toggle switch 1
- TSR 2-bay 1
- TSR/TSR II 2-bay 1
- TSR/TSR II 4-bay 1, 2
- rouer module population rules - bay 3 (live) 1, 2
- router module
- population rules - bay 3 1, 2
- router module population rules - bays 2 and 4 1, 2
S
- setting the connector 1
- shims
- maximum height 1, 2, 3, 4
- shutting down axes
- ( x) 1, 2
- (y - 4-bays) 1, 2
- side panel removal 1, 2
- site preparedness survey 1
- space requirements
- determining 1, 2
- Special Symbols
- caution 1
- warning 1
- switchable flex connectors 1, 2, 3, 4, 5, 6, 7, 8, 9
- 4-bay configuration 1
- backplane numbering 1, 2, 3, 4, 5, 6, 7
- setting the connector (4-bay) 1
- setting the connector (cold) 1, 2
- setting the connector (TSR/TSR II 2-bay)) 1
- setting the connector (TSR II) 1
T
- thinnet Ethernet connection 1, 2, 3, 4, 5, 6
- tools
- anchoring bays 1
- toroidal mesh 1, 2, 3, 4
- axes 1, 2, 3
- axes (x) 1, 2, 3, 4
- axes (y) 1, 2, 3, 4
- TSR
- build out rules 1
| |
|
|
Copyright © 2001
Avici Systems Inc.
Avici® and TSR® are registered
trademarks of Avici Systems Inc.
IPriori™ is a trademark of Avici Systems Inc.
Source File Name: 03539-00_revBAIX.fm
HTML File Name: index.html
Last Updated: 11/26/01 at 15:07:01
Please email suggestions and comments to: doc@avici.com