
Contents
Preface
About This Document Intended Audience What You Need to Know Related Information Document Organization
- Notational Conventions
Support Services Overview
Safety Information
- Antistatic Precautions
TSR/TSR II Multi-Bay Configuration
- The 2-Bay Configuration
- The 4-Bay Configuration
Installation Overview Positioning Multi-Bay Configurations
Preparing to Anchor Bays TSR 2-Bay and TSR/TSR II 4-Bay Configurations
- Determining Space Requirements
- Removing Side Panels on TSR Bays
- Securing EMI Gasket Material on TSR Bays
- Positioning TSR 2-Bay Configurations
- Positioning 4-Bay Configurations
- Connecting TSR and TSR II Bays
- Connecting Bays - TSR 2-Bay Configuration
- Adjusting the Alignment of TSR Bays
- Tightening the Connection Bolts
- Reinstalling the Side Panels
- Connecting Bays - TSR/TSR II 4-Bay Configuration
- Adjusting the Alignment of the Bays
- Tightening the Connection Bolts
- Rotary and Toggle Switch Settings
TSR/TSR II 2-Bay and 4-Bay Configurations
- Determining Space Requirements
- Removing Side Panels on TSR Bays
- Positioning TSR/TSR II 2-Bay Configurations
- Positioning 4-Bay Configurations
- Connecting TSR and TSR II Bays
- Connecting Bays - TSR/TSR II 2-Bay Configuration
- Adjusting the Alignment of TSR Bays
- Tightening the Connection Bolts
- Connecting Bays - TSR/TSR II 4-Bay Configuration
- Adjusting the Alignment of the Bays
- Tightening the Connection Bolts
- Rotary and Toggle Switch Settings
Connecting 2-Bay Configurations (TSR - Cold)
Overview Connecting Backplanes - 2-Bay Configuration
- Bay Numbering
- Installing the Antistatic Wrist Strap
- Removing EMI Enclosures
- Removing Loopback Connectors
- Installing Switchable Flex Connectors
- Securing EMI Enclosures
- Installing the Thinnet Ethernet
- Populating Bay 3 - Cold Installs
- Setting the Switchable Flex Connector
Connecting 2-Bay Configurations (TSR - Live)
Overview Connecting Backplanes - Live Upgrade
- Bay Numbering
- Installing the Antistatic Wrist Strap
- Removing EMI Enclosures
Performing Live Upgrades
- Determining Backplane Connection Locations
- Temporarily Shutting Down The X Axes
- Securing EMI Enclosures
- Installing the Thinnet Ethernet
- Populating Bay 3 - Live Upgrades
- Setting the Switchable Flex Connector
Connecting 4-Bay Configurations (TSR 2-Bay to TSR 11)
Overview Connecting Backplanes - Bay 2 to Bay 4
- Connecting Backplanes - Bay 2 and Bay 4
- Bay Numbering
- Installing the Antistatic Wrist Strap
- Removing EMI Enclosures
- Removing Loopback Connectors
- Installing EMI Base Plates
- Installing Switchable Flex Connectors
- Securing EMI Enclosures
Populating Bays 2 and 4
- Router Module Population Rules - Bays 2 and 4
- Determining Backplane Connection Locations
- Setting the Switchable Flex Connector
Connecting Bays 1 and 3 to Bays 2 and 4
- Installing Cable Racks
- Installing the Thinnet Ethernet
- Temporarily Shutting Down the Y Axes
- Preparing to Install OTT Cable Connectors
- Installing OTT Cable Connectors
- Bringing Up the Y Axes - Front to Rear Bays
Reinstalling EMI Enclosures Connecting 2-Bay Configurations (TSR/TSR II - Cold)
Connecting Backplanes - 2-Bay Configuration
- Bay Numbering
- Installing the Antistatic Wrist Strap
- Removing EMI Enclosures
- Removing Loopback Connectors
- Installing Switchable Flex Connectors
- Securing EMI Enclosures
- Installing the Thinnet Ethernet
Populating Bay 3 - Cold Installs
- Setting the Switchable Flex Connector
- Setting the Switchable Flex Connector
Connecting 2-Bay Configurations (TSR/TSR II - Live)
Connecting Backplanes - Live Upgrade
- Bay Numbering
- Installing the Antistatic Wrist Strap
- Removing EMI Enclosures
Performing Live Upgrades
- Determining Backplane Connection Locations
- Temporarily Shutting Down The X Axes
- Installing Switchable Flex Connectors
- Securing EMI Enclosures
- Installing the Thinnet Ethernet
Populating Bay 3 - Live Upgrades
- Setting the Switchable Flex Connector
Connecting 4-Bay Configurations (TSR/TSR II to TSR II)
Connecting Backplanes - Bay 2 to Bay 4
- Bay Numbering
- Installing the Antistatic Wrist Strap
- Removing EMI Enclosures
- Removing Loopback Connectors
- Installing EMI Base Plates
- Installing Switchable Flex Connectors
- Securing EMI Enclosures
Populating Bays 2 and 4
- Router Module Population Rules - Bays 2 and 4
- Determining Backplane Connection Locations
- Setting the Switchable Flex Connector
Connecting Bays 1 and 3 to Bays 2 and 4
- Installing Cable Racks
- Installing the Thinnet Ethernet
- Temporarily Shutting Down the Y Axes
- Preparing to Install OTT Cable Connectors
- Installing OTT Cable Connectors
- Bringing Up the Y Axes - Front to Rear Bays
Reinstalling EMI Enclosures Verifying OTT Connections
Overview Verifying Y Link Connectivity Index
|
Quadralay Corporation http://www.webworks.com Voice: (512) 719-3399 Fax: (512) 719-3606 sales@webworks.com |