| |
|
|
show mpls tunnel-handle
Displays the tunnel ID to tunnel name mapping.
Syntax: show mpls tunnel-handle [tunnel-id]
tunnel-id
Hexadecimal notation of the tunnel ID.
Description: Use the show mpls tunnel-handle command to display the names and IDs of all configured tunnels on this LSR.
Factory Default: None.
Command Mode: Privileged and executive.
Example: In the following example, the show mpls te tunnel-handle command displays handles of all tunnels:
router#show mpls tunnel-handle
tunnel ID tunnel name
0x201c484 t4g
0x201c264 t1
.
.
.
Related Commands: show mpls rsvp tunnel
show mpls te tunnel
show mpls te tunnel-names
tunnel
| |
|
|
Copyright © 2004
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: TE%20Commands.fm
HTML File Name: TE%20Commands88.html
Last Updated: 12/19/04 at 14:56:07