| |
|
|
show mpls te tunnel-names
Displays MPLS traffic engineering tunnel names.
Syntax: show mpls te tunnel-names
Description: Displays the names of all defined MPLS tunnels.
Use the show mpls te tunnel-names command to display the names of all the tunnels.
Factory Default: None.
Command Mode: Executive.
Example: In the following example, the show mpls te tunnel-names command displays the names of all the tunnels on this router:
router#show mpls te tunnel-names
tunnel t1
tunnel t2w
tunnel t3blue
tunnel t4g
tunnel t5
Related Commands: show mpls te
show mpls te tunnel
tunnel
| |
|
|
Copyright © 2004
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: TE%20Commands.fm
HTML File Name: TE%20Commands87.html
Last Updated: 12/19/04 at 14:56:07