show mpls te lsdb work

show mpls te lsdb work

Displays LSP work lists for based upon the function specified.

Syntax: show mpls te lsdb work {link-down | link-up | link-chg | idle [detail [limit limitVal]] | recompute [detail [limit limitVal]]| spf [detail [limit limitVal]] | spf-rerun [detail [limit limitVal]] | reinit [detail [limit limitVal]]}

detail

Display provides further detail for the specified option.

limit

Display provides detail within the number of seconds specified.

limitVal

Specifies the number of seconds of detail to display back from the time the command is entered. Valid values: 0 - 65535

Description: Use the show mpls te lsdb work command to display LSP work lists for the option specified. Use the detail keyword to display greater detail where available. Use the limit keyword specifying the number of seconds to limit the display to work events within that number of seconds.

Use the show mpls te lsdb work link-down command to display LSP link-down work lists.

Use the show mpls te lsdb work link-up command to display LSP link-up work lists.

Use the show mpls te lsdb work link-chg command to display LSP work lists for link changes.

Use the show mpls te lsdb work idle command to display work lists for idle LSPs.

Use the show mpls te lsdb work recompute command to display work lists for recomputed LSPs.

Use the show mpls te lsdb work spf command to display work lists for recent SPFs performed.

Use the show mpls te lsdb work spf-rerun command to display work lists for SPFs that have been rerun.

Use the show mpls te lsdb work reinit command to display work lists for reinitialized LSPs.

Factory Default: None.

Command Mode: Executive/Privilege.

Example: The following example displays sample output of the show mpls te lsdb work idle command:

router#show mpls te lsdb work idle

LSP work list: idle, priority 1 population 1

test("up")

router#

Example: The following example displays sample output of the show mpls te lsdb work idle command:

router#show mpls te lsdb work idle

LSP work list: idle, priority 1 population 1

test("up")

router#

Table 1-19. Fields Displayed by show mpls te lsdb addresses
Field Description

Type

Indicates if the address is for a link or for a router.

Address

IP addresses of the links and routers.

C-Tunnel

Tunnel ID used to identify tunnels. This identifier is also used to identify tunnels in the output of the show mpls te lsdb route command.

Tunnel -cost

Cost from this LSR to the end (egress) of the tunnel.

IGP-costs

Cost from the tunnel endpoint (egress) to the destination address.

Related Commands: show mpls te lsdb
show mpls statistics

detail	Display provides further detail for the specified option.
limit	Display provides detail within the number of seconds specified.
limitVal	Specifies the number of seconds of detail to display back from the time the command is entered. Valid values: 0 - 65535

router#show mpls te lsdb work idle LSP work list: idle, priority 1 population 1 test("up") router#

router#show mpls te lsdb work idle LSP work list: idle, priority 1 population 1 test("up") router#

**Table 1-19.** Fields Displayed by show mpls te lsdb addresses
Field	Description
Type	Indicates if the address is for a link or for a router.
Address	IP addresses of the links and routers.
C-Tunnel	Tunnel ID used to identify tunnels. This identifier is also used to identify tunnels in the output of the show mpls te lsdb route command.
Tunnel -cost	Cost from this LSR to the end (egress) of the tunnel.
IGP-costs	Cost from the tunnel endpoint (egress) to the destination address.

   Source File Name: TE%20Commands.fm
    HTML File Name: TE%20Commands83.html
    Last Updated: 12/19/04 at 14:56:07

show mpls te lsdb work

Please email suggestions and comments to: doc@avici.com