show mpls te lsdb spf

---

Displays SPF information in the link state data base.

Syntax: show mpls te lsdb spf

Description: Use the show mpls te lsdb spf command to display shortest path first information in the link state data base.

Factory Default: None.

Command Mode: Executive.

Example: The following example displays the shortest path first information in the link state data base for this router:

router#show mpls te lsdb spf SPFs SPF Result: digest= 0(00000000), use_count= 0, last_use= 00000000 Reachable Nodes Node 10.254.5.1 cost 0 SPF Result: digest= 73663546(0464043a), use_count= 1, last_use= 00000000 link 10.254.5.1 -> 10.254.5.2 [3.3.3.1 -- 3.3.3.2] link 10.254.5.2 -> 10.254.5.1 [3.3.3.2 -- 3.3.3.1] Reachable Nodes Node 10.254.5.1 cost 0 Node 10.254.5.2 cost 1 Path to 10.254.5.2 10.254.5.1 -> 10.254.5.2 (1) [3.3.3.1 3.3.3.2]

The following table describes fields in the display:

Table 1-18. Fields Displayed by show mpls te lsdb spf 

Field	Description
SPF Result:
digest	Used to locate SPF in cache.
use_count	Indicates how many references are made to this SPF.
last_use	Field not in use.
Reachable Nodes
Node n.n.n.n	IP address of a reachable node.
cost
link ->	List of available links.
Path to	Displays path to a reachable node including number of hops and link addresses.

Related Commands: show mpls te
show mpls te lsdb cooked
show mpls te lsdb raw
show mpls te lsdb route
show mpls te lsdb addresses
show mpls te lsdb work

Copyright © 2004 Avici Systems Inc.
Avici® and TSR® is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are trademarks of Avici Systems Inc.

   Source File Name: TE%20Commands.fm
    HTML File Name: TE%20Commands82.html
    Last Updated: 12/19/04 at 14:56:07

Please email suggestions and comments to: doc@avici.com