show mpls te lsdb route

---

Displays route information in the link state data base.

Syntax: show mpls te lsdb route

Description: Use the show mpls te lsdb route command to display route information in the link state data base.

Factory Default: None.

Command Mode: Executive.

Example: The following is sample output from the show mpls te lsdb route command:

router#show mpls te lsdb route Rte-Hndl Prefix Mask DSCP-Hi DSCP-Lo -------- --------------- ---- ------- ------- 201b7f8 10.254.5.2 ffffffff ffffffff ffffffff Tunnel-ID: 1fe96e8 Lsp member Tunnel Name OutIf ---------- ----------- ----- 0x20310fc red f0003

The following table describes fields in the display:

Table 1-17. Fields Displayed by show mpls te lsdb route 

Field	Description
Rte-Hndl	Handle for this route.
Prefix	Prefix for this route.
Mask	Mask associated with this route.
DSCP-Hi	For future use by QoS. Always set to ffffffff.
DSCP-Lo	For future use by QoS. Always set to ffffffff.
Tunnel-ID	Tunnel ID for the LSPs that follow.
Lsp member	LSP ID.
Tunnel Name	Tunnel name for this LSP.
OutIf	Outbound interface for this LSP.

Related Commands: show mpls te
show mpls te lsdb cooked
show mpls te lsdb raw
show mpls te lsdb addresses
show mpls te lsdb spf
show mpls te lsdb work

Copyright © 2004 Avici Systems Inc.
Avici® and TSR® is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are trademarks of Avici Systems Inc.

   Source File Name: TE%20Commands.fm
    HTML File Name: TE%20Commands81.html
    Last Updated: 12/19/04 at 14:56:07

Please email suggestions and comments to: doc@avici.com