show mpls te

---

Displays MPLS traffic engineering status for the router.

Syntax: show mpls te

Description: Use the show mpls te command to display the global MPLS settings.

Factory Default: None.

Command Mode: Executive.

Example: The following is sample output of the show mpls te command:

router#show mpls te Traffic engineering is enabled IGP: ospf Default maximum reservable bandwidth: 100.0000% Traffic engineering enabled on 4 interfaces. Administrative color(s): color name "blue" bit 3 color name "green" bit 4 color name "orange" bit 10 color name "red" bit 1 color name "white" bit 2 color name "yellow" bit 9 color list name: "bright" color name "red" bit 1 color name "white" bit 2 color list name: "dark" color name "blue" bit 3 color name "green" bit 4

The following table describes the fields in the display:

Table 1-11. Fields Displayed by show mpls te 

Field	Description
Traffic engineering is enabled/disabled	Whether traffic engineering is enabled or disabled on this router.
IGP	Specifies the IGP for this network. Valid values are isis and ospf.
Default maximum reservable bandwidth	Bandwidth used when the maximum reservable bandwidth is not explicitly configured.
Traffic engineering enabled on	Number of interfaces on this router configured to support traffic engineering.
Administrative color(s):	Administrative colors and color-lists configured on this router.

Related Commands: show mpls te interface
show mpls statistics
show mpls statistics lsp
show mpls te tunnel
show interfaces pos

Copyright © 2004 Avici Systems Inc.
Avici® and TSR® is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are trademarks of Avici Systems Inc.

   Source File Name: TE%20Commands.fm
    HTML File Name: TE%20Commands75.html
    Last Updated: 12/19/04 at 14:56:07

Please email suggestions and comments to: doc@avici.com