show mpls statistics lsp

---

Displays MPLS statistics for a specified label switched path.

Syntax: show mpls statistics lsp [ingress-ip-addr] [verbose | brief] [file filename]

ingress-ip-addr	IP address of the ingress of the specified LSP.
verbose	Display detailed statistics.
brief	Display summarized statistics.
file filename	Save output of the display to the specified file.

Description: Displays statistics for the specified LSP in either summarized (brief) or detailed format.

Use the show mpls statistics lsp ingress-ip-addr command to display detailed statistics for the specified LSP.

Use the show mpls statistics lsp ingress-ip-addr brief command to display summarized statistics for the specified LSP.

Use the file filename keyword and argument to save the display output to the specified file.

Factory Default: None.

Command Mode: Executive.

Example 1: In the following example, the show mpls statistics lsp brief command displays summarized statistics:

router#show mpls statistics lsp brief LSP id 132, 81.81.81.1 -> 6.6.6.6 (Tunnel id 69, 't10') outsegment POS 1/2/1, handle 152 - Packets out: 93293217, Bytes out: 3502247557 LSP id 124, 91.91.91.1 -> 6.6.6.6 (Tunnel id 66, 't1') outsegment POS 1/1/4, handle 352 - Packets out: 0, Bytes out: 0 LSP id 126, 91.91.91.1 -> 6.6.6.6 (Tunnel id 67, 't3') outsegment POS 1/1/4, handle 360 - Packets out: 0, Bytes out: 0 . . . Total LSPs: 10

Example 2: In the following example, the show mpls statistics lsp verbose command displays detailed statistics for LSPs:

router#show mpls statistics lsp verbose LSP id 3, 3.3.3.1 -> 10.254.5.2 (Tunnel id 3, 'red') outsegment POS 1/15/1, handle 24 Label action: push 1, label(s): 4095 Packets out: 0 Bytes out: 0 LSP id 3, 3.3.3.2 -> 10.254.5.1 (Tunnel id 3, 'redback') insegment POS 1/15/1, label 4095 connects NONE Packets in: 0 Bytes in: 0

The following table describes the fields in the display: The following table describes the fields in the display:

Table 1-10. Fields Displayed by show mpls statistics lsp 

Field	Description
LSP id	LSP ID for the LSP. ID includes ingress and egress addresses, tunnel ID and tunnel name.
outsegment POS n/n/n	Identifies the outgoing interface of this outsegment using the Interface-type bay/slot/port notation.
handle:	Identifies the interface using the handle notation.
Label actions	Push: MPLS label is added onto existing label stack. Pop: MPLS label is remove from label stack. Swap: Incoming MPLS label is swapped for outgoing MPLS label.
label(s)	Label ID(s) for indicated label action.
Packets out:	Number of packets out on this segment.
Bytes out:	Number of bytes out for this segment.
packets dropped:	Number of packets dropped by this segment.
bytes dropped:	Number of bytes dropped by this segment.
insegment POS n/n/n	Identifies the incoming interface of this insegment using the Interface-type bay/slot/port notation.
label	Label expected on packets arriving on this insegment.
connects
Packets in:	Number of packets in on this segment.
Bytes in:	Number of bytes in on this segment

Related Commands: show mpls rsvp statistics
show mpls statistics
show mpls te
show mpls te interface

Copyright © 2004 Avici Systems Inc.
Avici® and TSR® is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are trademarks of Avici Systems Inc.

   Source File Name: TE%20Commands.fm
    HTML File Name: TE%20Commands74.html
    Last Updated: 12/19/04 at 14:56:07

Please email suggestions and comments to: doc@avici.com