show mpls statistics

---

Displays statistics for specified insegments, outsegments, and LSPs.

Syntax: show mpls statistics [collect times seconds | insegment | outsegment | lsp] {verbose | brief} [file filename]

collect times seconds	Specifies the number of times statistics are collected and the number of seconds for which statistics are collected. Valid values are: times: 1 - 255 collections. seconds: 0 - 59 seconds per collection.
insegment	Display only statistics for insegments or the specified insegment.
outsegment	Display only statistics for outsegments or the specified outsegment.
lsp	Display LSP statistics.
verbose	Display detailed statistics.
brief	Display summarized statistics.
file filename	Specify file name where display output is stored.

Description: Use the show mpls statistics commands to display the number of packets and bytes that traverse a specified insegment, outsegment or LSP.

Use the collect times seconds keyword and arguments to specify the number of times statistics are collected and the number of seconds of each collection.

Use the file filename keyword and argument to save the output of the display command in the specified file.

Use the brief keyword to display only non-zero statistics.

Use the verbose keyword to display all statistics.

Use the show mpls statistics insegment command to display statistics for insegments.

Use the show mpls statistics outsegment command to display statistics for outsegments.

Use the show mpls statistics lsp command to display statistics for LSPs.

Factory Default: None.

Command Mode: Privileged and executive.

Example 1: In the following example, the show mpls statistics outsegment brief command displays summarized statistics for outsegments on this LSR:

router#show mpls statistics outsegment brief outsegment POS 1/2/3, handle 8 - Packets out: 0, Bytes out: 0 outsegment POS 1/2/3, handle 16 - Packets out: 0, Bytes out: 0 outsegment POS 1/2/3, handle 24 - Packets out: 0, Bytes out: 0

Example 2: In the following example, the show mpls statistics outsegment verbose command displays statistics for outsegments on this LSR:

router#show mpls statistics outsegment verbose outsegment POS 1/2/3, handle 8 Label action: push 1, label(s): 4095 LSP id 676, 91.91.91.2 -> 7.7.7.7 (Tunnel id 602, 'tsr701') Packets out: 0 Bytes out: 0 outsegment POS 1/2/3, handle 16 Label action: push 1, label(s): 4094 LSP id 677, 91.91.91.2 -> 7.7.7.7 (Tunnel id 603, 'tsr702') Packets out: 0 Bytes out: 0 outsegment POS 1/2/3, handle 24 Label action: push 1, label(s): 4093 LSP id 678, 91.91.91.2 -> 7.7.7.7 (Tunnel id 604, 'tsr703') Packets out: 0 Bytes out: 0

The following table describes the fields in the display:

Table 1-9. Fields Displayed by show mpls statistics        

Field	Description
outsegment POS n/n/n	Identifies the outgoing interface of this outsegment using the Interface-type bay/slot/port notation.
handle:	Identifies the interface using the handle notation.
insegment POS n/n/n	Identifies the incoming interface of this insegment using the Interface-type bay/slot/port notation.
Packets in:	Number of packets in on this segment.
Bytes in:	Number of bytes in on this segment
Label actions	Push: MPLS label is added onto existing label stack. Pop: MPLS label is remove from label stack. Swap: Incoming MPLS label is swapped for outgoing MPLS label.
label(s)	Label ID(s) for indicated label action.
packets out:	Number of packets out on this segment.
bytes out:	Number of bytes out for this segment.
packets dropped:	Number of packets dropped by this segment.
bytes dropped:	Number of bytes dropped by this segment.

Related Commands: show mpls te path-list
show mpls te tunnel
show mpls rsvp tunnel
show interfaces pos

Copyright © 2004 Avici Systems Inc.
Avici® and TSR® is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are trademarks of Avici Systems Inc.

   Source File Name: TE%20Commands.fm
    HTML File Name: TE%20Commands73.html
    Last Updated: 12/19/04 at 14:56:07

Please email suggestions and comments to: doc@avici.com