
show mpls rsvp statistics
Displays the RSVP statistics.
Syntax: show mpls rsvp statistics [interface interfaceID] [brief]
interfaceID
Full interface ID of an RSVP interface. i.e. pos bay/slot/port.
Description: Use the show mpls rsvp statistics command to display RSVP statistics.
Use the show mpls rsvp statistics brief command to display only non-zero RSVP statistics.
Factory Default: None.
Command Mode: Executive and privileged.
Example 1: The following is sample output from the show mpls rsvp statistics brief command:
router#show mpls rsvp statistics brief
RSVP-TE MESSAGES
Type Received Sent
1 Path 3501 4503
2 Resv 3504 4299
3 PathErr 0 0
4 ResvErr 0 0
5 PathTear 1 3
6 ResvTear 0 0
7 ResvConf 0 0
12 Bundle 714 627
13 Ack 6467 5749
15 SRefresh 7511 7524
20 Hello 0 0
RSVP-TE ERROR COUNTERS
1 NACK objects rcvd
1 NACK objects sent
796 ACKs received for unknown state
RSVP-TE PACKET PARSE STATISTICS
21698 No error
router#
Example 2: The following is sample output from the show mpls rsvp statistics command:
router#show mpls rsvp statistics
RSVP-TE MESSAGES
Type Received Sent
1 Path 3501 4503
2 Resv 3504 4299
3 PathErr 0 0
4 ResvErr 0 0
5 PathTear 1 3
6 ResvTear 0 0
7 ResvConf 0 0
12 Bundle 714 627
13 Ack 6467 5749
15 SRefresh 7515 7530
20 Hello 0 0
RSVP-TE ERROR COUNTERS
0 Resv timeouts
0 Path timeouts
0 Admit fails
0 Policy fails
0 Other fails
0 No Resv sent/scope
0 WF received without scope
0 Blockade/ignore
0 Path[T] in with ttl=0
0 Path[T] TTL expired
0 Path[T] multicast TTL< threshold
0 Msgs discarded while RSVP-TE off
0 Unsupported session type
0 Illegal neighbor
0 Multicast session msgs discarded
0 Path loops back to incoming interface
0 Routing loop detected in RRO
0 Incoming ERO rejected
0 WF style rejected
0 Label allocation fails
1 NACK objects rcvd
1 NACK objects sent
0 Out Of Order msgs rcvd
796 ACKs received for unknown state
0 Packet retransmits
0 New Path dropped, not enough memory
0 Packets dropped due to transmit error
0 Packets dropped during interface 'restore'
RSVP-TE PACKET PARSE STATISTICS
21702 No error
0 Packet length error
0 Unknown RSVP version
0 Bad RSVP checksum
0 INTEGRITY bad or missing
0 INTEGRITY association unknown
0 Unknown message type
0 Obj should not appear in msg type
0 Missing required object
0 Illegal object length
0 Unknown object class
0 Violation of required object order
0 Missing SESSION object
0 Missing STYLE
0 Unknown style id
0 Missing FILTER_SPEC
0 Wrong # flow descriptors
0 LIH out of range
0 SrcPort non-zero but DstPort is zero
0 N/PHOP IP addr is invalid
0 Path message had TTL = 0
0 INTEGRITY seq# replayed
0 Memory error
0 Multiple occurrence of object
0 LRO via RSVP incapable neighbor
0 Bad RRO
0 Bad destination port
0 Unknown ctype
0 Unsupported proto for lsp
0 Bad LRO
0 IP dst and SESSION addr differ
0 Bad Intserv object
0 No sender descriptor
0 No flow descriptor
0 Time Value Error
router#
Example 3: The following is sample output from the show mpls rsvp statistics interface brief command for POS interface 1/5/3:
router#show mpls rsvp statistics interface pos 1/5/3 brief
RSVP-TE MESSAGES
Type Received Sent
1 Path 1000 1001
2 Resv 1001 1000
3 PathErr 0 0
4 ResvErr 0 0
5 PathTear 0 1
6 ResvTear 0 0
7 ResvConf 0 0
12 Bundle 157 155
13 Ack 1641 1703
15 SRefresh 2508 2510
20 Hello 0 0
RSVP-TE ERROR COUNTERS
0 Resv timeouts
0 Path timeouts
0 Admit fails
0 Policy fails
0 Other fails
0 No Resv sent/scope
0 WF received without scope
0 Blockade/ignore
0 Path[T] in with ttl=0
0 Path[T] TTL expired
0 Path[T] multicast TTL< threshold
0 Msgs discarded while RSVP-TE off
0 Unsupported session type
0 Illegal neighbor
0 Multicast session msgs discarded
0 Path loops back to incoming interface
0 Routing loop detected in RRO
0 Incoming ERO rejected
0 WF style rejected
0 Label allocation fails
0 NACK objects rcvd
0 NACK objects sent
0 Out Of Order msgs rcvd
0 ACKs received for unknown state
0 Packet retransmits
0 New Path dropped, not enough memory
0 Packets dropped due to transmit error
0 Packets dropped during interface 'restore'
RSVP-TE PACKET PARSE STATISTICS
6307 No error
0 Packet length error
0 Unknown RSVP version
0 Bad RSVP checksum
0 INTEGRITY bad or missing
0 INTEGRITY association unknown
0 Unknown message type
0 Obj should not appear in msg type
0 Missing required object
0 Illegal object length
0 Unknown object class
0 Violation of required object order
0 Missing SESSION object
0 Missing STYLE
0 Unknown style id
0 Missing FILTER_SPEC
0 Wrong # flow descriptors
0 LIH out of range
0 SrcPort non-zero but DstPort is zero
0 N/PHOP IP addr is invalid
0 Path message had TTL = 0
0 INTEGRITY seq# replayed
0 Memory error
0 Multiple occurrence of object
0 LRO via RSVP incapable neighbor
0 Bad RRO
0 Bad destination port
0 Unknown ctype
0 Unsupported proto for lsp
0 Bad LRO
0 IP dst and SESSION addr differ
0 Bad Intserv object
0 No sender descriptor
0 No flow descriptor
0 Time Value Error
router#
The following table describes the fields in the display:
Related Commands: rsvp neighbor enable-label-requests
show mpls rsvp
show mpls rsvp lsp-list
show mpls rsvp neighbor
show mpls rsvp neighbor-list
show mpls rsvp tunnel
Copyright © 2004
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori, Composite Links, SSR, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: TE%20Commands.fm
HTML File Name: TE%20Commands71.html
Last Updated: 12/19/04 at 14:56:07