show mpls rsvp neighbor

---

Displays the connection configuration to the specified RSVP neighbor, or all RSVP neighbors

Syntax: show mpls rsvp neighbor [interface interfaceID] [ipAddress]

ipAddress	IP address of an RSVP neighbor.
interfaceID	Full interface ID of an RSVP neighbor. i.e. pos bay/slot/port.

Description: Use the show mpls rsvp neighbor command with no arguments to display all configured RSVP neighbors.

Use the show mpls rsvp neighbor interface command to display the RSVP connection configuration to the specified neighbor.

Use the show mpls rsvp neighbor ipAddress command to display the RSVP connection configuration to the specified neighbor.

Factory Default: None.

Command Mode: Executive and privileged.

Example 1: In the following example, The show mpls rsvp neighbor command displays information for all RSVP neighbors:

router#show mpls rsvp neighbor 10.13.1.2 Refresh-reduction: Enabled Message-reliability: Enabled Highest message id: 0x327f Epoch: 0x2993 Interface(s): POS 1/5/3 10.21.1.2 Refresh-reduction: Enabled Message-reliability: Enabled Highest message id: 0x1fa6 Epoch: 0x1b4a Interface(s): POS 1/5/2 10.51.1.1 Refresh-reduction: Enabled Message-reliability: Enabled Highest message id: 0x32bc Epoch: 0x1312 Interface(s): POS 1/5/4 router#

Example 2: In the following example, The show mpls rsvp neighbor interface command displays information for the specified RSVP neighbor:

router#show mpls rsvp neighbor interface pos 1/5/3 10.13.1.2 Refresh-reduction: Enabled Message-reliability: Enabled Highest message id: 0x327f Epoch: 0x2993 Interface(s): POS 1/5/3 router#

Example 3: In the following example, The show mpls rsvp ipAddress command displays information for the specified RSVP neighbor:

router#show mpls rsvp neighbor 10.13.1.2 10.13.1.2 Refresh-reduction: Enabled Message-reliability: Enabled Highest message id: 0x327f Epoch: 0x2993 Interface(s): POS 1/5/3 router#

The following table describes the fields in the display:

Table 1-5. Fields Displayed by show mpls rsvp neighbor 

Field	Description
Refresh-reduction:	Specifies enabled or disabled.
Message-reliability	Specifies enabled or disabled.
Highest message id:	Displays hex value of highest message ID.
Epoch:
Interface(s)	Specifies interface(s) for this neighbor.

Related Commands: rsvp neighbor enable-label-requests
show mpls rsvp
show mpls rsvp lsp-list
show mpls rsvp statistics
show mpls rsvp tunnel

Copyright © 2004 Avici Systems Inc.
Avici® and TSR® is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are trademarks of Avici Systems Inc.

   Source File Name: TE%20Commands.fm
    HTML File Name: TE%20Commands69.html
    Last Updated: 12/19/04 at 14:56:07

Please email suggestions and comments to: doc@avici.com