| |
|
|
rsvp refresh-reduction
Enable sending summary refresh messages.
Syntax: [no] rsvp refresh-reduction
Description: The sending of summary refresh messages is disabled by default. By including multiple message IDs in a single message, summary refresh cuts down on the amount of RSVP signaling. Summary refresh messages will only be sent if the neighbor supports refresh reduction.
Use the refresh-reduction command in interface configuration mode to enable summary refresh messaging on this interface.
Use the no refresh-reduction command in interface configuration mode to disable summary refresh messaging on this interface.
Factory Default: Disabled.
Command Mode: Interface configuration.
Example 1: In the following example summary refresh messaging is enabled on interface 1/1/1:
router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
router(config)#interface pos 1/1/1
router(config-if)#rsvp refresh-reduction
router(config-if)#end
router#
Example 2: In the following example summary refresh messaging is disabled on interface 1/1/1:
router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
router(config)#interface pos 1/1/1
router(config-if)#no rsvp refresh-reduction
router(config-if)#end
router#
Related Commands: message-reliability
refresh-reduction
show mpls rsvp statistics
| |
|
|
Copyright © 2004
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: TE%20Commands.fm
HTML File Name: TE%20Commands65.html
Last Updated: 12/19/04 at 14:56:07