| |
|
|
parameter-set
Defines/deletes a traffic engineering parameter-set changes the command mode to parameter-set command mode.
Syntax: [no] parameter-set name
name
Specifies the name of a defined parameter-set to be applied to this tunnel.
Description: Parameter-sets are "sets" of tunnel attributes. Parameter-sets are used during tunnel configuration as a convenient method of configuring tunnel parameters.
Use the parameter-set command to apply the specified parameter-set to a tunnel.
Use the no parameter-set command to delete the specified parameter-set from a tunnel definition.
Factory Default: None.
Command Mode: Traffic engineering tunnel-name.
Example: In the following example the parameter-set command applies the parameter-set named OC48best to tunnel oc48toBos:
router(config)#mpls te ospf
router(config-te)#tunnel oc48toBOS
router(config-te-tunnel)#parameter-set OC48best
Related Commands: tunnel
tunnel default
tunnel parameter-set
| |
|
|
Copyright © 2004
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: TE%20Commands.fm
HTML File Name: TE%20Commands50.html
Last Updated: 12/19/04 at 14:56:07