| |
|
|
message-bundling
Enable RSVP refresh message bundling.
Syntax: [no] message-bundling
Description: Refresh Reduction message bundling is the queueing of outgoing RSVP-TE messages to a neighbor and sending them as a bundle. Messages are not bundled if the neighbor does not support refresh reduction. Latency may be introduced by message queueing.
Use the rsvp message-bundling command to enable message bundling on this interface.
Use the no rsvp message-bundling command to disable message bundling on this interface.
Factory Default: Disabled.
Command Mode: Interface configuration.
Example 1: In the following example message bundling is enabled on interface 1/1/1:
router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
router(config)#interface pos 1/1/1
router(config-if)#rsvp message-bundling
router(config-if)#end
router#
Example 2: In the following example message bundling is disabled on interface 1/1/1:
router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
router(config)#interface pos 1/1/1
router(config-if)#no rsvp message-bundling
router(config-if)#end
router#
Related Commands: rsvp message-reliability
rsvp refresh-reduction
show mpls rsvp statistics
| |
|
|
Copyright © 2004
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: TE%20Commands.fm
HTML File Name: TE%20Commands30.html
Last Updated: 12/19/04 at 14:56:07