show ip route multicast

---

Displays configured multicast static routes.

Syntax: show ip route multicast

Description: The show ip route multicast command displays active configured multicast routes in the Routing Information Base (RIB) used for RPF calculation.

Factory Default: None.

Command Mode: Privileged.

Example: The following example displays configured multicast static routes:

router#show ip route multicast Codes: C - connected        O - OSPF        i - IS-IS S - Static       IA - inter area      L1 - level-1 B - BGP          EI - external type 1 L2 - level-2 E2 - external type 2 *  - candidate default m - route's metric w - route's weight C        10.200.1.0./16       directly connected to Ethernet 0 C        127.0.0.1/32         via 198.10.2.10 [w:0 m:20] 0        198.10.8.0/24        via 198.10.7.7 [w:0 m:20]

The following table describes the fields in the display:

Table 2-19. Fields Displayed by show ip route multicast 

Field	Description
Codes	Describes type of configured route in Multicast Routing Base (RIB)
N.N.N.N/nn	Network address and mask of the remote network.
via N.N.N.N.	Indicates next router in the remote network.
directly connected to	Indicates the network is directly connected to a local interface
w:	The weight assigned to this route.
m:	The metric assigned to this route.

Related Commands: showip mroute
show ip mvifs
show ip pim interface
show ip pim rp
show ip pim rp-hash

Copyright © 2004 Avici Systems Inc.
Avici® and TSR® is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are trademarks of Avici Systems Inc.

   Source File Name: MultiCommds.fm
    HTML File Name: MultiCommds27.html
    Last Updated: 12/19/04 at 14:57:49

Please email suggestions and comments to: doc@avici.com