| |
|
|
Local Protection uses RSVP signaling to bypass a single primary label switched path (LSP) link or node failure. Use the commands in this chapter to:
- Enable/disable Local Protection
- Configure backup path inuse resiliency for a primary LSP
- Access midpoint default command mode
- Configure make-before-break backup path IDs
- Specify local protect signal incapable routers
- Enable/disable node disjoint
- Enable/disable fast reroute
- Configure midpoint local protect parameters
- Configure SRLGs
| |
|
|
Copyright © 2004
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: LocalProtectCommands.fm
HTML File Name: LocalProtectCommands.html
Last Updated: 12/19/04 at 14:59:39