| |
|
|
tunnel-name
Configures a name for the optical path.
Syntax: [no] tunnel-name tunnel-name
tunnel name
A text string that identifies the name for an optical path.
Description: Use the tunnel-name command to identify the name for an optical path. The tunnel name defaults to the interface name if the tunnel name is not configured.
Use the no tunnel-name command to remove the name for an optical path.
Factory Default: Tunnel derives name from optical-path interface.
Command Mode: Configuration Interface.
Example:
router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
router(config)#interface optical-path 1p1
router(config-if)#local-optical-nodelocal-optical-node opt1
router(config-if)#tna-remote 10.10.10.3
router(config-if)ip address 1.1.1.2 255.255.255.0
router(config-if)peer default ip address 1.1.1.1
router(config-if)#bandwidth-min oc 12 factor 1
router(config-if)#bandwidth-max oc 12 factor 4
router(config-if)terminator
router(config-if)#tunnel name opt1Boston
router(config-if)no shutdown
router(config-if)end
router#
Related Commands: None.
| |
|
|
Copyright © 2005
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: OIF-UNI.fm
HTML File Name: OIF-UNI23.html
Last Updated: 02/25/05 at 14:56:43