| |
|
|
tna-remote
Configures the tna-remote address for an optical-node.
Syntax: [no] tna-remote address
address
IP address of the remote optical-node.
Description: The Transport Network Address (TNA) tna-remote address uniquely identifies theending point of an optical node. Use the tna-remote command to configure the remote TNA IP address. The TNA-remote address is the IP address of the remote side of the optical-node.
Use the no tna-remote command to delete the remote TNA connection.
Factory Default: None.
Command Mode: Interface.
Example:
router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
router(config)#interface optical-path 1p1
router(config-if)#local-optical-node opt1
router(config-if)#tna-remote 10.10.10.3
router(config-if)no shutdown
router(config-if)end
router#
Related Commands: tna-local
| |
|
|
Copyright © 2005
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: OIF-UNI.fm
HTML File Name: OIF-UNI22.html
Last Updated: 02/25/05 at 14:56:43