| |
|
|
bandwidth-min
Configures the minimum bandwidth for an optical-path.
Syntax: bandwidth-min oc bandwidth factor factor
bandwidth
Valid values determined by module speed/capacity.
factor
Valid values are the number of ports per module. Varies from 1 to 16.
Description: Use the bandwidth-min oc bandwidth factor factor command to configure the minimum bandwidth on an optical-path interface. If minimum bandwidth is not specified, the minimum will be the same as the requested bandwidth.
Table 4-1. Bandwidth Allocation Bandwidth (Speed/ Capacity) Factor (Number of Ports) Bandwidth Command Example: OC48
2
bandwith-min oc 48 factor 2
OC192
1
bandwidth min oc 192 factor 1
Factory Default: One.
Command Mode: Interface.
Example:
router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
router(config)#interface optical-path 1p1
router(config-if)#local-optical-node opt1
router(config-if)#bandwidth-min oc 12 factor 1
router(config-if)#bandwidth-max oc 12 factor 4
router(config-if)#end
router#
Related Commands: bandwidth-max
| |
|
|
Copyright © 2005
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: OIF-UNI.fm
HTML File Name: OIF-UNI2.html
Last Updated: 02/25/05 at 14:56:43