PREV NEXT INDEX

Put your logo here!


isis hello-multiplier


Configures the hello multiplier to use on this interface.

Syntax: [no] isis hello-multiplier number

number

The multiplier used to determine how long to hold an IS-IS hello packet before declaring an adjacency down. Valid values are 3 - 1000.

Description: Each hello packet sent from an intermediate system contains a hold timer field. This field tells the receiving intermediate system how long to wait for another hello packet before declaring the adjacency down.

If the hello interval is 10 seconds and the hello multiplier is 5, the adjacent intermediate system will wait 50 seconds for a hello packet from this adjacent intermediate system before declaring the adjacency down.

Use the isis hello-multiplier number command to configure the multiplier for this interface.

Use the no isis hello-multiplier to configure the multiplier as the default value of 10.

Factory Default: 10 times hello interval.

Command Mode: Interface configuration.

Example: In the following example:

router(config)#router isis net1

router(config-router)#net 49.0001.0000.0000.0020.00

router(config-router)#interface pos 1/5/1

router(config-if)#ip router isis net1

router(config-if)#isis hello-interval 15

router(config-if)#hello-multiplier 5

router(config-if)#end

router#sho run int

.

.

.

!

interface pos 1/5/1

sonet path-trace NPI1 1/5/1

ip address 10.100.53.2 255.255.255.0

crc 16

ip router isis net1

 isis hello-interval 15 level-1

 isis hello-multiplier 5 level-1

.

.

.



Related Commands: ip router isis
isis hello-interval
isis hello-padding
isis retransmit-interval
net
router isis


PREV NEXT INDEX

Copyright © 2002 Avici Systems Inc.
Avici® and TSR® are registered trademarks of Avici Systems Inc.
IPriori™ and SSR™ are trademarks of Avici Systems Inc.

   Source File Name: ISIS.fm
    HTML File Name: ISIS11.html
    Last Updated: 05/30/02 at 13:21:52

Please email suggestions and comments to: doc@avici.com