Preface

The Terabit Switch Router Install Guide (Split Bay) describes the procedures for installing and verifying operation of the TSR^® system hardware.

About This Document

This document contains descriptions of:

• TSR system hardware
  
  
• Replaceable units
  
  
• Anchoring and installation procedures
  
  

The hardware descriptions familiarize you with the system hardware components and their physical location in the TSR bay.

The installation procedures assist you in installing the TSR bay hardware, including:

• Making the required power, safety ground, and interface connections
  
  
• Populating the bay
  
  

  NOTE If you need information concerning a multiple bay installation, please refer to TSR Install Guide (Multi-Bay).

Intended Audience

The audience for this document is qualified service personnel trained in on-site network equipment installations.

Document Organization

This document is organized into the following chapters:

Chapter	Description
"Overview"	Describes safety information and recommendations and an overview of the system hardware and installation process.
"Preinstallation"	Describes the preinstallation preparations, including: unpacking, transporting, and unloading the TSR system in the installation location.
"Placing and Anchoring Bays"	Describes the procedures for positioning and anchoring a TSR system.
"Installing TSR Bay Components"	Describes the procedures for installing the TSR hardware and populating the bay.
"Installing System Cables"	Describes the procedures and connection locations for installing and connecting the system cables.
"Installing Bay Panels"	Describes the procedures for installing the front and side panels.
"POST and Troubleshooting"	Describes the system Power On Self-Test (POST) and module status LEDs.
"Routine Maintenance"	Describes the procedures for performing periodic system maintenance.

Related Information

Administrators should be familiar with Central Office (CO) equipment operation and theory before installing the TSR system. The following documents are recommended as further reading:

• Terabit Switch Router Site Preparation Guide, Avici Systems Inc., 1999
  
  
• NEBS Requirements: Physical Protection GR-63-CORE and GR-1089 CORE
  
  
• International Telecommunications Union Standards ITU-TS
  
  
• IPriori Software Configuration Guide, Avici Systems Inc., 1999
  
  

What You Need to Know

Familiarity with data communications and electronic concepts and terms is necessary to understand the information presented in this guide.

One to two years of experience installing data communications equipment is necessary to perform the installation procedures in this guide.You must be familiar with general cabinet, shelf, and circuit board installation techniques and terminology. In addition, you must be aware of all electrical and physical safety procedures and standards.

Support Services

There are three ways to obtain information on customer service and training:

• United States Support: 877-292-8424 (TSR-BY-AVICI)
  International Support: 01-978-964-2350
  
  
• E-mail: support@avici.com
  
  
• World Wide Web: http://www.avici.com
  
  

Notational Conventions

The following are samples of the caution and warning conventions used in this document:

	WARNING This symbol indicates a risk of death or personal injury.
	CAUTION This symbol indicates a risk of service interruption or equipment damage.

Copyright © 2001 Avici Systems Inc.
Avici® and TSR® are registered trademarks of Avici Systems Inc.
IPriori™ is a trademark of Avici Systems Inc.

   Source File Name: Preface.fm
    HTML File Name: preface.html
    Last Updated: 06/11/01 at 10:29:51

Please email suggestions and comments to: doc@avici.com