| |
|
|
bay-all
Enter bay configuration mode for all bays.
Syntax: bay-all
Description: Each Avici bay contains one or two bay controller that monitor the bay, switch modules, cooling modules, and power.
These controllers have associated flash memory which can be set with the boot command. You can also control the type of logging messages that are received regarding these bay controller modules.
Each bay controller contains two flash memory locations: 1 and 2. Each flash location can be loaded with a separate boot image for the bay controller.
Use the bay-all command to change the command mode to Bay configuration for ALL bay controllers, and access the various commands to configure the bay controller(s).
Use the boot command without the optional file argument to set the default image from which to boot.
Use the boot file command to burn the specified file into the selected flash memory location.
Use the flags command to set the boot flags to be used when the system is restarted. To add new boot flags to the existing boot flag, perform a logical "OR" on the existing boot flag and the new setting.
Use the logging-max-history max_files and the logging-filter system level commands to configure logging for the specified bay controller.
The following commands are available in Bay configuration command mode:
The following commands are available in bay-all mode:
Table 3-2. Commands in Bay-all Configuration Command Mode Command Description exit
exit from bay-all mode.
boot[flags flag {1|2} | file]
Modify boot parameters for all bay controllers.
help
Description of the interactive help system.
logging-max-history max_files
Change the maximum number of log files that are created on the permanent storage for the current system. A number will form the extension to the stored file name and be numbered from 0 to max_file -1. Default is 5. Allowed range is 1 to 100.
logging-filter system level
Specify that the hardware entity does not generate events for the specified system at or below the specified level. Note that critical errors are always generated regardless of filtering. Multiple logging filter statements can be given. Default is to log all levels above and including warning for all systems.
no
Negate a command or set its defaults.
post-burn filename
Burn POST on individual or all bay(s).
rom-burn filename
Burn ROM on individual or all module(s).
reboot [flags flag {1|2} | file]
Modify boot parameters and reboot all bay controllers.
Example: In the following example, all bay controllers are set to boot from location 1 with a maximum number of logging files set to 50:
router(config)#bay-all
router(config-bay-all)#boot 1
router(config-bay-all)#logging-max-history 50
router(config-bay-all)#exit
router(config)#
Related Commands: module
module all
server
| |
|
|
Copyright © 2005
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: sys_mgmt.fm
HTML File Name: sys_mgmt8.html
Last Updated: 02/25/05 at 14:26:49