bay

bay

Enter bay configuration mode.

Syntax: bay baynum/controllernum

baynum

The number of the bay on which this controller resides.

controllernum

The number of the controller to configure. There are two controllers on every bay. Numbered 1 and 2. Controller 1 sits on the bottom left side of the bay. Controller 2 sits on the bottom right side of the bay.

Description: Each Avici bay contains one or two bay controller that monitor the bay, switch modules, cooling modules, and power.

These controllers have associated flash memory which can be set with the boot command. You can also control the type of logging messages that are received regarding these bay controller modules.

Each bay controller contains two flash memory locations: 1 and 2. Each flash location can be loaded with a separate boot image for the bay controller.

Use the bay command to change the command mode to Bay configuration, and access the various commands to configure the bay controller(s).

Use the boot command without the optional file argument to set the default image from which to boot.

Use the boot file command to burn the specified file into the selected flash memory location.

Use the flags command to set the boot flags to be used when the system is restarted. To add new boot flags to the existing boot flag, perform a logical "OR" on the existing boot flag and the new setting.

Use the logging-max-history max_files and the logging-filter system level commands to configure logging for the specified bay controller.

The following commands are available in Bay configuration command mode:

Table 3-1. Commands in Bay Configuration Command Mode
Command Description

boot [flags flag {1|2} | file]

Modify boot parameters for this bay controller.

exit

Exit from bay controller command mode.

help

Description of the interactive help system.

logging-max-history max_files

Change the maximum number of log files that are created on the permanent storage for the current system. A number will form the extension to the stored file name and be numbered from 0 to max_file -1. Default is 5. Allowed range is 1 to 100.

logging-filter system level

Specify that the hardware entity does not generate events for the specified system at or below the specified level. Note that critical errors are always generated regardless of filtering. Multiple logging filter statements can be given. Default is to log all levels above and including warning for all systems.

no

Negate a command or set its defaults.

post-burn filename

Burn POST on individual or all bay(s).

rom-burn filename

Burn ROM on individual or all module(s).

reboot [flags flag {1|2} | file]

Modify boot parameters and reboot this bay controller.

Example: In the following example, bay controller 1 on bay 1 is set to boot from location 1 and has its maximum number of logging files set to 50.

router(config)#bay 1/1

router(config-bay)#boot 1

router(config-bay)#logging-max-history 50

router(config-bay)#exit

router(config)#

Related Commands: bay-all
module
module all
server
show bay
show bay slots
show version

baynum	The number of the bay on which this controller resides.
controllernum	The number of the controller to configure. There are two controllers on every bay. Numbered 1 and 2. Controller 1 sits on the bottom left side of the bay. Controller 2 sits on the bottom right side of the bay.

**Table 3-1.** Commands in Bay Configuration Command Mode
Command	Description
boot [flags flag {1\|2} \| file]	Modify boot parameters for this bay controller.
exit	Exit from bay controller command mode.
help	Description of the interactive help system.
logging-max-history max_files	Change the maximum number of log files that are created on the permanent storage for the current system. A number will form the extension to the stored file name and be numbered from 0 to max_file -1. Default is 5. Allowed range is 1 to 100.
logging-filter system level	Specify that the hardware entity does not generate events for the specified system at or below the specified level. Note that critical errors are always generated regardless of filtering. Multiple logging filter statements can be given. Default is to log all levels above and including warning for all systems.
no	Negate a command or set its defaults.
post-burn filename	Burn POST on individual or all bay(s).
rom-burn filename	Burn ROM on individual or all module(s).
reboot [flags flag {1\|2} \| file]	Modify boot parameters and reboot this bay controller.

router(config)#bay 1/1 router(config-bay)#boot 1 router(config-bay)#logging-max-history 50 router(config-bay)#exit router(config)#

   Source File Name: sys_mgmt.fm
    HTML File Name: sys_mgmt7.html
    Last Updated: 02/25/05 at 14:26:49

bay

Please email suggestions and comments to: doc@avici.com