PREV NEXT INDEX

Avici Systems Inc.

show modules

Displays the current configuration and state for all modules or a specified module.

Syntax: show modules [bay/slot] [brief]

bay/slot

Display information for only the specified module.

brief

Display summarized information.

Description: This command displays configuration information for one or all modules in this bay.

Use the show modules command to display information for all modules.

Use the show modules bay/slot command to display information about the specified module.

NOTE Newly installed modules that are running a software image that is not compatible with the image running on the server(s), bay controllers, and other modules are displayed as Administratively Up, with a state of: IncompatibleSW

Use the show modules brief command to display summarized information.

Factory Default: None.

Command Mode: Privileged.

Example 1: In the following example, the show modules bay/slot command displays information about module 1/16:

router#show modules 1/16

MODULE 1/16:

Server Access Module attached to interface Eth1

Discovered (1xOC48c) 1 Port Packet Over SONET OC-48c/STM-16c MPLS-Capable

Configured (1xOC48c) 1 Port Packet Over SONET OC-48c/STM-16c

Physical port type is short range single mode fiber

Hardware is 1xOC48c, Version 3.1, Revision BA

Fabric version is 2.0

IPriori release version: 6.1.2.1

Operational image version: IPriori Operational Image 6.1.2.1 Label: R6.1_DEV.090, Built on Sep 16 2004, 21:29:34

ROM Version: IPriori Bootrom Release 6.28.0.0 built Aug 9 2004, 16:41:49

POST Software Version: 8.43.0.0

Product Id: CELROM000488 (Rev. CE); S/N CELROM000488

Module CLEI Code:

Last started on WED NOV 10 20:32:17 2004

Module uptime is 3 days, 20 hours, 28 minutes, 21 seconds

Administratively Up; Current state is Up



Max number of historical logging files: 5

Module Reboot Policy: Maximum reboots: 3 in 60 min. Current reboots: 1



router#

Example 2: In the following example, the show module command displays a module whose operational image is not compatible with the other platforms in the bay:

router#show module 1/3

MODULE 1/3:

Discovered (2xOC48c) 2 Port Packet Over SONET OC-48c/STM-16c MPLS-Capable

Configured (2xOC48c) 2 Port Packet Over SONET OC-48c/STM-16c

Physical port type is short range single mode fiber

Hardware is 2xOC48c, Version 1.1, Revision BA

Fabric version is 2.0

Software version: Platform: cm-d; Label: R4.0_REL.52, Built on Jun 28 2001, 15:19:38

ROM Version: IPriori Bootrom Release 5.7 built Jun 4 2001, 17:30:23



  POST Software Version: Unavailable

  FPGA Software Version: Release 2.0

  Product Id: P2-S16O48-SR-R (Rev. AA); S/N CELROM001020

Module CLEI Code: IPI2PNLDAA

Started 1 time

Last started on MON JUL 02 08:49:17 2001

Module is not up.

Administratively Up; Current state is IncompatibleSW



  Module 1/3 requires module image and FPGA software upgrade to Release 4.0.1



Max number of historical logging files: 100

The following table describes the fields in the display:

Table 3-24. Fields Displayed by show modules 
Field Description

MODULE n/n

Specifies the bay number and slot number.

Server Access Module/Backup Server Access Module

This line appears if the specified module is a server attached module or backup server access module.

Discovered

Specifies the type of module discovered by the Bay Controller in the specified slot. Indicates if this module is capable of supporting MPLS.

Configured

Specifies they type of module configured for this slot.

Physical port type

Specifies the type of fiber installed in the specified slot.

Hardware is

Hardware type and version number for the module.

Fabric version

Version of the Avici router fabric.

IPriori release version:

Version of IPriori software loaded on the module.

Operational image version

Platform, label and date operational image was built.

ROM version:

Version of the Boot ROM on the module.

Line Card FPGA Software Version

Version of the FPGA software on the line card portion of the module.

Switch Card FPGA Software Version

Version of the FPGA software on the line card portion of the module. Displayed only if the switch card has an FPGA.

POST Software Version

Version of the POST image on the module.

Product Id:

Specifies the product identifier for the module.

Module CLEI Code:

Common Language Equipment Identification (CLEI) Code assigned by Telcordia for this module.

Started

The number of times the module has been restarted since the bay came up.

Last started on

The time at which the module was last started.

Module Uptime

The amount of time the module has been up.

Administrative status

Indicates the administrative state of the module.

  • Administratively Up - Module has been discovered and configured and is operational.

  • Administratively Down - module is discovered and configured but has been shut down.

Current state is

Indicates the operational state of the module.

  • up - Module has been discovered and configured and is operational.

  • down - module is discovered and configured but is not operating. Indicates problem.

  • unconfigured - Module has been booted but has not yet been fully configured.

  • misconfigured - Module has been booted but is not properly configured.

  • unknown - The bay controller has not yet discovered the module.

  • IncompatibleSW - The module is running a software image that is not compatible with the server(s), bay controllers, and other modules.

Max number of historical logging files:

A value from 1 to 199, indicating the maximum number of log files created. Set using the logging-max-history command.

Non-default logging filters:

Input filtering to the logging system as defined using the logging-filter command.

Example 3: In the following example, the show modules brief command displays summarized information about the modules:

router#show modules brief

Module Discovered Configured Last Started Status Starts

1/4 1x10GbE 1x10GbE FRI NOV 12 10:20:01 2004 Up 1

1/5 4xOC12c 4xOC12c FRI NOV 12 10:20:04 2004 Up 1

1/6 8xOC3-4xOC12ms 8xOC3-4xOC12ms FRI NOV 12 10:20:04 2004 Up 1

S 1/7 16xOC3c 16xOC3c FRI NOV 12 10:20:00 2004 Up 1

1/8 8xOC12ms 8xOC12ms FRI NOV 12 10:20:05 2004 Up 1

1/13 4xOC48c 4xOC48c FRI NOV 12 10:20:05 2004 Up 1

1/15 4xOC48c 4xOC48c FRI NOV 12 10:20:06 2004 Up 1

1/16 1xOC192c 1xOC192c FRI NOV 12 10:20:05 2004 Up 1

1/17 8xOC3-4xOC12ms 8xOC3-4xOC12ms FRI NOV 12 10:20:05 2004 Up 1

1/18 16xOC3ms 16xOC3ms FRI NOV 12 10:20:06 2004 Up 1

router#

The following table describes the fields in the display:

Table 3-25. Fields Displayed by show modules brief 
Field Description

x/x

Bay and slot number where the module is installed. S - Indicates the module is a Server-attached module (SAM).

Discovered

Indicates the type of module discovered by the Bay Controller.

Configured

Indicates the type of module IPriori has configured for the specified bay/slot.

Starts

The number of times this module has been started since the Avici router was started.

Last Started

Date and time of last start.

Status
  • Admin Down - module is discovered and configured but has been shut down.

  • up - Module has been discovered and configured and is operational.

  • down - module is discovered and configured but is not operating.

  • unconfigured - Module has been booted but has not yet been fully configured.

  • misconfigured - Module has been booted but is improperly configured.

  • unknown - The bay controller has not yet discovered the module.

  • IncompatibleSW - The module is running a software image that is not compatible with the server(s), bay controllers, and other modules.

Related Commands: module
module all
package-file
show fpga module
show package-file
show population

PREV NEXT INDEX

Copyright © 2005 Avici Systems Inc.
Avici® and TSR® is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are trademarks of Avici Systems Inc.

   Source File Name: sys_mgmt.fm
    HTML File Name: sys_mgmt50.html
    Last Updated: 02/25/05 at 14:26:49

Please email suggestions and comments to: doc@avici.com