show fpga module

---

Displays FPGA module information for the specified or all modules.

Syntax: show fpga module {bay/slot | all}

bay/slot	Specifies the bay and slot location of the module to be displayed. bay - Valid values: 1 - 2. slot - Valid values: 1 - 40.
all	Specifies that FPGA information should be displayed for all modules for this Avici router.

Description: Use the show fpga module bay/slot command to display FPGA information for the specified module.

Use the show fpga module all command to display FPGA download information for all modules.

Factory Default: None.

Command Mode: Executive and privileged.

Example: In the following example, the show fpga module command displays FPGA information for the specified module:

NOTE The module in the following example is a late-version 2xOC-48c with FPGAs on both the linecard and switchcard portions of the module. If the module was an older version, with FPGAs only on the linecard portion of the module, the second half of the output below would not appear.

router#show fpga module 1/4 MODULE 1/4: Line Card #1: FPGA image #1: Size: 2727787 bytes Build Date and Time: 9/1/2004 11:09:46 FPGA Version: 0.17.0.0 LineCard Hardware Type: 1x10gbe FPGA image #2: Size: 2727787 bytes Build Date and Time: 9/14/2004 10:56:12 FPGA Version: 0.18.0.0 LineCard Hardware Type: 1x10gbe Active FPGA image bank is 2 Switchcard FPGA image #1: Size: 4082152 bytes Build Date and Time: 4/21/2004 09:51:28 FPGA Version: 0.23.0.0 SwitchCard Hardware Type: sw_v2 Switchcard FPGA image #2: Size: 4082152 bytes Build Date and Time: 4/21/2004 09:51:28 FPGA Version: 0.23.0.0 SwitchCard Hardware Type: sw_v2 Switchcard Active FPGA image bank is 1 router#

The fields displayed in the show fpga module command are:

Table 3-19. Fields Displayed by show fpga module 

Field	Description
Module bay/slot	The module for which FPGA information is being displayed.
FPGA image #1	Information about the FPGA image loaded into image bank 1.
FPGA image #2	Information about the FPGA image loaded into image bank 2.
Size	The size of the image in the specified bank.
Build Date and Number	The build date and number of the image in the specified bank delineated by a colon (:).
FPGA Version	Version of the FPGA image.
Line Card Hardware Type	Specifies the line card type on this module.
Active FPGA image bank	Specifies the bank used for the next reload of the FPGA image for this module.
Switchcard FPGA	Later versions of routing modules have FPGAs on both the line card and switch card portions of the module. If the routing module has an FPGA on the switchcard, information about the FPGA is also displayed.

Related Commands: fpga activebank
fpga download
show package-file

Copyright © 2005 Avici Systems Inc.
Avici® and TSR® is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are trademarks of Avici Systems Inc.

   Source File Name: sys_mgmt.fm
    HTML File Name: sys_mgmt48.html
    Last Updated: 02/25/05 at 14:26:49

Please email suggestions and comments to: doc@avici.com