| |
|
|
server-location
Adds a description to the server configuration identifying the slot where the server is installed.
Syntax: server-location bay/slot
bay/slot
Specifies the bay and slot in which the server is installed.
Description: Servers must be installed in the following slots:
In a full bay configuration:
- Servers are restricted to slots 11 and 20. When only one server is installed, it must be in slot 11, and slot 20 must be filled with a filler module.
In a split bay configuration:
- Upper logical router - the server module is restricted to slot 11.
- Lower logical router - the server module is restricted to slot 31.
Use the server-location command to add descriptive text to the running configuration file and the output of the show server command specifying the slot in which the server is installed.
NOTE The information created by the server-location command is for display only. If you enter the server location for a full bay configuration incorrectly, this mis-information is accepted and displayed by the show running-config and show server commands.
Factory Default: None.
Command Mode: Configuration.
Example: In the following example, the server-location command configures the server in the upper router of a split bay configuration, and the show server command displays the new setting:
router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
router(config)#server 1 upper
router(config-server)#server-location 1/11
router(config-server)#end
router#show server 1
Server ID 1
Server: full - Controls all slots in bay 1
Location (bay/slot): 1/11
.
.
.
Related Commands: bay
module
server
show server
| |
|
|
Copyright © 2005
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: sys_mgmt.fm
HTML File Name: sys_mgmt39.html
Last Updated: 02/25/05 at 14:26:49