server

server

Changes the command mode to Server-configuration for the specified server.

Syntax: server server-id

server-id

Identifies the server as set with the server-id command.

Description: Use the server server-id command to change the command mode to Server configuration for the specified server.

The following commands are supported in Server configuration command mode:

Table 3-6. Commands in Server Configuration Command Mode
Command Description

exit

Exit from server configuration command mode.

help

Displays the interactive help system.

logging-max-history max_files

Configure the maximum number of log files that are created on the permanent storage for the current system. A number will form the extension to the stored file name and be numbered from 0 to max_file -1. Default is 5. Allowed range is 1 to 100.

logging-filter system level

Specify that the hardware entity does not generate events for the specified system at or below the specified level. Note that critical errors are always generated regardless of filtering. Multiple logging filter statements can be given. Default is to log all level errors (and above) for all systems.

no

Negate a command or set its defaults.

Factory Default: None.

Command Mode: Configuration.

Example: In the following example;

The server 1 command identifies server 1, and changes the command mode to Server configuration.

The logging-max history command configures the maximum number of log files associated with server 1 as 10

The show server command displays the setting:

router(config)#server 1

router(config-server)#logging-max-history 10

router(config-server)#end

router#show server

Server ID 1

Server: upper - Controls slots 1 - 20

.

.

.

Max number of historical logging files: 10

Non-default logging filters:

transport information

Related Commands: bay
module
server
show server

server-id	Identifies the server as set with the server-id command.

**Table 3-6.** Commands in Server Configuration Command Mode
Command	Description
exit	Exit from server configuration command mode.
help	Displays the interactive help system.
logging-max-history max_files	Configure the maximum number of log files that are created on the permanent storage for the current system. A number will form the extension to the stored file name and be numbered from 0 to max_file -1. Default is 5. Allowed range is 1 to 100.
logging-filter system level	Specify that the hardware entity does not generate events for the specified system at or below the specified level. Note that critical errors are always generated regardless of filtering. Multiple logging filter statements can be given. Default is to log all level errors (and above) for all systems.
no	Negate a command or set its defaults.

router(config)#server 1 router(config-server)#logging-max-history 10 router(config-server)#end router#show server
Server ID 1 Server: upper - Controls slots 1 - 20 . . . Max number of historical logging files: 10 Non-default logging filters: transport information

   Source File Name: sys_mgmt.fm
    HTML File Name: sys_mgmt37.html
    Last Updated: 02/25/05 at 14:26:49

server

Please email suggestions and comments to: doc@avici.com