| |
|
|
redundancy
Provides access to redundancy configuration mode.
Syntax: redundancy
Description: Redundancy configuration such as route controller mode and fail-over window are configured in redundancy configuration mode.
Use the redundancy command from system configuration command mode to enter redundancy configuration command mode.
Use the show redundancy command to display redundancy statistics.
Factory Default: None.
Command Mode: Configuration.
Example 1: The following example places the CLI in redundancy configuration mode:
router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
router(config)#redundancy
router(config-redundancy)#
Related Commands: default
failover window
mode
show redundancy
| |
|
|
Copyright © 2005
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: sys_mgmt.fm
HTML File Name: sys_mgmt32.html
Last Updated: 02/25/05 at 14:26:49