| |
|
|
fpga activebank
Specifies the FPGA image bank number for the next module reload.
Syntax: fpga activebank [1|2]
fpga activebank [linecard | switchcard] [1|2]
1 | 2
Specifies the bank number containing the FPGA image for the next module reload.
linecard
For later versions of routing modules: specifies the image is loaded to the FPGA on the linecard portion of the module.
switchcard
For later versions of routing modules: specifies the image is loaded to the FPGA on the switchcard portion of the module.
Description: Use the fpga activebank [1 | 2] command to specify the bank containing the FPGA image to be loaded at the next module reload. Only those module that have FPGAs are effected.
Later versions of routing modules have FPGAs on both the line card and switch card portions of the module. If a later version is detected, the linecard and switchcard options are available.
Use the fpga activebank linecard [1|2] or the fpga activebank [1|2] command to specify the which FPGA bank will be loaded on the linecard portion of the module at the next reload.
Use the fpga activebank switchcard [1|2] command to specify the which FPGA bank will be loaded on the switchcard portion of the module at the next reload.
Factory Default: None.
Command Mode: Module-all.
Example 1: In the following example, the fpga activebank 1 (with no argument) command is used to configure all modules to use bank 1 at the next FPGA reload.
NOTE Notice that the command does not use the linecard/switchcard argument. Only the linecard portion of a late version module (module 1/6) is modified.
router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
router(config)#module all
router(config-module-all)#fpga activebank 1
router(config-module-all)#exit
router#show fpga module all
MODULE 1/5:
FPGA image #1:
Size: 1966183 bytes
Build Date and Number: 2/6/2001 : 0
LineCard Hardware Type: 1xoc192c-a
LineCard Hardware Version: 0.0
FPGA image #2:
Size: 1966183 bytes
Build Date and Number: 2/6/2001 : 0
LineCard Hardware Type: 1xoc192c-a
LineCard Hardware Version: 0.0
Active FPGA image bank is 1
MODULE 1/6:
FPGA image #1:
Size: 104099 bytes
Build Date and Number: 2/15/2001 : 0
FPGA Version: 0.0
LineCard Hardware Type: 2xoc48c
FPGA image #2:
Size: 104099 bytes
Build Date and Number: 2/15/2001 : 0
FPGA Version: 0.4
LineCard Hardware Type: 2xoc48c
Active FPGA image bank is 1
Switchcard FPGA image #1:
Size: 2308632 bytes
Build Date and Number: 9/29/2001 : 0
FPGA Version: 0.2
SwitchCard Hardware Type: Unknown
Switchcard FPGA image #2:
Size: 2308632 bytes
Build Date and Number: 9/29/2001 : 0
FPGA Version: 0.2
SwitchCard Hardware Type: Unknown
Switchcard Active FPGA image bank is 2
Related Commands: module
module all
fpga download
show fpga module
| |
|
|
Copyright © 2005
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: sys_mgmt.fm
HTML File Name: sys_mgmt22.html
Last Updated: 02/25/05 at 14:26:49