
crashdump force
Provides for configuration of crashdump per router platform.
Syntax: crashdump force {server serverID | module bay/slot | bay bay/slot}
serverID
Specifies the ID number of the route-controller. Valid Values: 1 - 64. Default: None
bay/slot
Specifies the bay and slot number of the module or bay-controller delineated by a forward-slash "/".
Under normal operation a crashdump will not take place unless a configured condition for the platform occurs. A crashdump can be forced for a platform on which crashdump is enabled using the crashdump force command in privileged command mode.
WARNING A crashdump takes a platform out of service for the entire period of the dump. Though the period of time is variable, in all cases it would constitute an excessive period within the operations of a live network. Do not enable crashdump in a live network. Usage of crashdump without the direct assistance of Avici customer support is not supported under any circumstances. Only trained technical personnel are capable of using the output of a crashdump.
Use the crashdump force command in privileged command mode specifying the platform and platform ID to force a previously configured and enabled crashdump for that platform.
Use the crashdump command in configuration command mode to configure and enable crashdump for this Avici router.
Use the show crashdump command to display current configuration settings by specified platform.
Factory Default: Disabled.
Command Mode: Privileged.
Example: In the following example the crashdump force server command is used to force a crashdump on route-controller 1 based upon the current configuration of crashdump for that route-controller
router#crashdump force server 1
router#
crashdump
show crashdump
Copyright © 2005
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori, Composite Links, SSR, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: sys_mgmt.fm
HTML File Name: sys_mgmt16.html
Last Updated: 02/25/05 at 14:26:49