| |
|
|
snmp trap sonet section
Enables/disables section trap reporting on a SONET interface.
Syntax: [no] snmp trap sonet section [cv-rising | es-rising | lof-failure | lof-failure-cleared | los-failure | los-failure-cleared | sefs-rising | ses-rising]
cv-rising
Enables/disables generation of a SNMP trap when the number of Coding Violations (CV) encountered by a SONET/SDH section in a particular 15 minute interval rises above a threshold defined by the sonet threshold section command.
es-rising
Enables/disables generation of a SNMP trap when the number of Errored Seconds (ES) encountered by a SONET/SDH section in a particular 15 minute interval rises above a threshold defined by the sonet threshold section command.
lof-failure
Enables/disables generation of a SNMP trap when a Loss Of Frame defect (LOF) is received.
lof-failure-cleared
Enables/disables generation of a SNMP trap when an loss of frame event is cleared.
los-failure
Enables/disables generation of a SNMP trap when a Loss Of Signal defect (LOS) is received.
los-failure-cleared
Enables/disables generation of a SNMP trap when an loss of signal event is cleared.
sefs-rising
Enables/disables generation of a SNMP trap when the number of Severely Errored Framing Seconds (SEFS) encountered by a SONET/SDH section in a particular 15 minute interval rises above a threshold defined by the sonet threshold section command.
ses-rising
Enables/disables generation of a SNMP trap when the number of Severely Errored Seconds (SES) encountered by a SONET/SDH section in a particular 15 minute interval rises above a threshold defined by the sonet threshold section command.
Description: Use the various snmp trap sonet section commands to enable and disable the generation of SNMP traps when events occur or thresholds are exceeded.
Factory Default: Failure traps and failure clear traps are reported. All other SONET section traps are disabled.
Command Mode: Interface configuration.
Example: In the following example, interface 1/1/1 is configured to send an SNMP trap when the number of Severely Errored Framing Seconds (SEFS) encountered by a SONET/SDH section in a particular 15 minute interval rises above a threshold defined by the sonet threshold command:
router(config)#interface pos 1/1/1
router(config-if)#snmp trap sonet section sefs-rising
router(config-if)#end
Related Commands: debug snmp packets
show interface pos
sonet threshold section
show snmp
| |
|
|
Copyright © 2005
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: snmp%20commands.fm
HTML File Name: snmp%20commands23.html
Last Updated: 02/25/05 at 14:31:00