| |
|
|
end
Exits to privileged command mode from a child (or grandchild) mode of configuration.
Syntax: end
Use the end command to back up multiple command mode levels to privileged mode.
NOTE Use the exit command to back up a single level of command modes.
Factory Default: None.
Command Mode: Any of the command modes within the configuration mode.
Figure 1-3. The End Command
Example: In the following example, the end command returns to privileged command mode from Interface configuration - LDP command mode:
router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
router(config)#interface pos 1/1/2
router(config-if)#mpls ldp
router(config-if-ldp)#sess-init-threshold 35
router(config-if-ldp)#end
router#
Related Commands: enable
exit
| |
|
|
Copyright © 2005
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: navigation.fm
HTML File Name: navigation6.html
Last Updated: 02/25/05 at 14:25:22