| |
|
|
enable
Enters privileged mode.
Syntax: enable [level]
level
Specifies the privilege level expected by the TACACS server when TACACS+ authentication default is enabled. Valid Values: 0 - 15. Default: 15
Description: When you telnet into the Avici router, you enter the Avici router's executive mode.
Use the enable command to enter privileged mode. At the password prompt, enter a string of between 4 and 20 alphanumeric characters.
Use the enable level command to specify the privilege level for this server used by TACACS authentication. Use the show privilege command to display the current privilege level for this server.
Factory Default: None.
Command Mode: Executive
Figure 1-2. The Enable Command
.
Example 1: In the following example, the enable command changes the command mode from executive to privileged:
router>enable
password:
router#
Example 2: In the following example, the enable command changes the command mode to privileged, and the ? displays the commands available in privileged command mode:
router>enable
password:
router#?
calendar Calendar functions
cd Change Device
clear Reset functions
clock Clock functions
configure Enter configuration mode
.
.
.
unerase Restore a file from the TRASH
write Write running configuration to memory, network or terminal
Related Commands: end
help
show privilege
| |
|
|
Copyright © 2005
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: navigation.fm
HTML File Name: navigation5.html
Last Updated: 02/25/05 at 14:25:22