| |
|
|
clear sonet performance current
Clears sonet performance counters for the current 15 minute intervals.
Syntax: clear sonet performance current pos bay/slot/port
pos bay/slot/port
Identifies a specific POS interface on an Avici router. Valid values are as follows:
bay: Identifier for this bay. Valid values are 1 through x where x is the number of installed bays..
slot: Slot number where the module is installed. Valid values are 1 - 40.port: Valid values equal number of valid ports for the specified module.
Description: Clear the SONET performance current 15 minute interval statistics for a specified POS interface using the clear sonet performance current command.
Factory Default: None.
Command Mode: Configuration.
Example: In the following example, the SONET current 15 minute interval counters are cleared for POS interface 1/1/1:
router(config)#clear sonet performance current pos 1/1/1
router(config)#end
router#show sonet performance current pos 1/1/1
CV ES SES SEFS UAS
Section 0 0 0 0 n/a
Line 0 0 0 n/a 0
Line Far End 0 0 0 n/a 0
Path 0 0 0 n/a 0
Path Far End 0 0 0 n/a 0
Related Commands: show sonet performance current
| |
|
|
Copyright © 2005
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: SONET.fm
HTML File Name: SONET2.html
Last Updated: 02/25/05 at 14:29:54