| |
|
|
show rmon value
Displays the value of the specified object.
Syntax: show rmon value rmonvariable
rmonvariable
The system name or number of the desired object.
Example: Use this command to display the current value for the specified object. The object may be specified by either name or number:
Factory Default: None.
Command Mode: Privileged.
Example 1: In the following example the show rmon value command displays the value for the ifInOctets.1/1/1/phy object:
router>enable
router#show rmon value ifInOctests.1/1/1/phy
The value of ifInOctets.65537 is 0
Example 2: In the following example the show rmon value command displays the value for the same object specified by number instead of name:
router>enable
router#show rmon value 1.3.6.1.2.1.2.2.1.10.65537
The value of ifInOctets.65537 is 0
Related Commands: None
| |
|
|
Copyright © 2005
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: RemMonCmds.fm
HTML File Name: RemMonCmds10.html
Last Updated: 02/25/05 at 14:31:31