|
|
|
|
show debugging
Displays the current status of protocol debug and debug logging.
Syntax: show debugging [all]
Description: Use the show debugging command to display the current status of protocol debugging and debug logging for this Avici router. The output provides:
Use show debugging all to display debugging per console and telnet sessions.
Factory Default: None.
Command Mode: Privileged.
Example 1: The following example displays the output after enabling a composite link from the console and enabling logging:
router>enable
password:
router#debug composite-link oc48c1 ppp lcp normal
router#logging log-debug
router#show debugging
Debug logging is enabled
PPP
lcp enabled for normal level on composite-link oc48c1
router#
Example 2: The following example displays the output the all option after enabling debug on a POS link from the VTY2 telnet session:
router#debug interface pos 1/1/1 ip bgp
router#show debugging
IP BGP
bgp-peer enabled for normal level on interface POS 1/1/1
router#show debugging all
Line console 0
No debug enabled
Line vty 2
IP BGP
bgp-peer enabled for normal level on interface POS 1/1/1
Table 15-6. Fields Displayed by show debugging
Table 15-7.
Field Description Debug Logging
Specifies whether debug logging is enabled or disabled for this Avici router.
Related Commands: debug all
debug ip bgp
debug isis
debug ip ospf
debug ppp
debug mpls
logging log-debug
|
|
|
|
Copyright © 2005
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: ProtoDebugCmds.fm
HTML File Name: ProtoDebugCmds13.html
Last Updated: 02/25/05 at 14:32:18