| |
|
|
logging log-debug
Enables logging of protocol debug output to the current log file.
Syntax: logging log-debug [log-only]
no logging log-debug
log-only
Redirects protocol debug output to the current log only. No display on the originating console or telnet session takes place with this option enabled. Default: disabled.
Description: Use the logging log-debug command to redirect protocol debug output to the current log file in addition to displaying on the originating console or telnet session.
Use the logging log-debug log-only command to redirect protocol debugging output to the current log file only. When this command is enabled, protocol debug output does not display on the originating console or telnet session.
Use the no logging log-debug command to disable the redirection of protocol debug output to the current log file. This command disables protocol debug output to the originating console or telnet session.
Use the show debugging command to display the current status of debug logging.
Factory Default: None.
Command Mode: Privileged.
Example 1: The following example enables protocol debug logging:
router>enable
password:
router#logging log-debug
router#show debugging
Debug logging is enabled
No debug enabled
router#
Example 2: The following example disables BGP peering debug for the composite link oc48c1 interface:
router#no debug composite-link oc48c1 ppp lcp
router#show debugging No debug enabled
router#
Related Commands: debug all
debug ip bgp
debug isis
debug ip ospf
debug ppp
debug mpls
show debugging
| |
|
|
Copyright © 2005
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: ProtoDebugCmds.fm
HTML File Name: ProtoDebugCmds12.html
Last Updated: 02/25/05 at 14:32:18