show co-alarms

---

Displays active central office alarms.

Syntax: show co-alarms [all  |  critical  |  major  |  minor]

Description: Use this command to display active central office alarms. Display all active alarms by not specifying an alarm level such as critical, major, or minor, or by specifying all. Adding one of the three alarm level variables to the command line causes only alarms with the specified alarm level to display.

Displayed alarms contain the following fields:

Table 11-1. Fields Displayed by show co-alarms

Field	Description
Event description	A brief description of the event that caused the alarm, including the affected component and bay number.
Alarm Type	One of three alarm severities: critical, major, or minor.

Factory Default: None.

Command Mode: Privileged.

Example 1: In the following example the show co-alarms command displays all currently active alarms for all bays:

router>enable router#show co-alarms

Example 2: In the following example the show co-alarms critical command displays all currently active critical alarms for the current bay:

router>enable router#show co-alarms critical Event Description                            Alarm Type Module 1 in bay 1 >= critical threshold      Critical

Related Commands: silence co-alarms

Copyright © 2005 Avici Systems Inc.
Avici® and TSR® is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are trademarks of Avici Systems Inc.

   Source File Name: CentralOfficeCmds.fm
    HTML File Name: CentralOfficeCmds3.html
    Last Updated: 02/25/05 at 14:31:28

Please email suggestions and comments to: doc@avici.com