| |
|
|
service led-test
Tests the critical, major and minor LEDs on the Avici router bay.
Syntax: service led-test
Syntax: service led-test {bayControllerID | bayID}
bayContrllerID
Location of the bay controller in the format bay/slot:
bay: Identifier for this bay. Valid values are 1 through x where x is the number of installed bays..
slot: Slot number where the module is installed. Valid values are 1 - 40.bayID
Specifies the Bay number. Valid Values: 1 - 14.
Description: This command lights the critical, major, and minor LEDs on the Avici router bay for 10 seconds and then turns the LEDs off.
Factory Default: None.
Command Mode: Privileged.
Example: In the following example the service led-test command lights the central office critical, major, and minor LEDs on the Avici router for bay 1:
router>enable
router#service led-test 1
Related Commands: silence co-alarms
| |
|
|
Copyright © 2005
Avici Systems Inc.
Avici® and TSR®
is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are
trademarks of Avici Systems Inc.
Source
File Name: CentralOfficeCmds.fm
HTML File Name: CentralOfficeCmds2.html
Last Updated: 02/25/05 at 14:31:28