PREV NEXT INDEX

Avici Systems Inc.


snmp trap sonet line


Enables/disables SONET line traps on a specific interface.

Syntax: [no] snmp trap sonet line [ais-failure  |  ais-failure-cleared | cv-rising | ses-rising | rfi-failure | rfi-failure-cleared | ses-rising | uas-rising]

ais-failure

Enables/disables generation of a SNMP trap when an Alarm Indication Signal (AIS) is received.

ais-failure-
cleared

Enables/disables generation of a SNMP trap when an alarm indication signal is cleared.

cv-rising

Enables/disables generation of a SNMP trap when the number of Coding Violations (CV) encountered by a SONET/SDH line entity in a particular 15 minute interval rises above a threshold defined by the sonet threshold line command.

es-rising

Enables/disables generation of a SNMP trap when the number of Errored Seconds (ES) encountered by a SONET/SDH line entity in a particular 15 minute interval rises above a threshold defined by the sonet threshold line command.

rfi-failure

Enables/disables generation of a SNMP trap when a Remote Failure Indication (RFI) is received

rfi-failure-
cleared

Enables/disables generation of a SNMP trap when a remote failure indication is cleared.

ses-rising

Enables/disables generation of a SNMP trap when the number of Severely Errored Seconds (SES) encountered by a SONET/SDH line entity in a particular 15 minute interval rises above a threshold defined by the sonet threshold line command.

uas-rising

Enables/disables generation of a SNMP trap when the number of Unavailable Seconds (UAS) encountered by a SONET/SDH line entity in a particular 15 minute interval rises above a threshold defined by the sonet threshold line command.

Description: Use the various snmp trap sonet line commands to enable and disable the generation of SNMP traps when events occur or thresholds are exceeded.

Factory Default: Failure traps and failure clear traps are reported. All other SONET line traps are disabled.

Command Mode: Interface configuration.

Example: In the following example, an interface is configured to send an SNMP trap when the number of unavailable seconds (UAS) encountered by a SONET/SDH line entity in a particular 15 minute interval rises above a threshold defined by the sonet threshold command:

router#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

router(config)#interface pos 1/1/1

router(config-if)#snmp trap sonet line uas-rising

router(config-if)#end

Related Commands: snmp-server enable traps
sonet threshold line


PREV NEXT INDEX

Copyright © 2004 Avici Systems Inc.
Avici® and TSR® is a registered trademark of Avici Systems Inc.
IPriori™, Composite Links™, SSR™, QSR, and NSR® are trademarks of Avici Systems Inc.

   Source File Name: snmp.fm
    HTML File Name: snmp11.html
    Last Updated: 05/10/04 at 10:56:38

Please email suggestions and comments to: doc@avici.com